Search
Categories
- Tuners
- Bridges - Tailpieces
- Tremolos
-
Pickups - Preamps - Piezo
- Electric Guitar Pickups
- Acoustic guitar pickups
- Bass Guitar Pickups & Preamps
- Ghost® modular pickup system by GRAPHTECH®
- Pickups covers
- Pickups rings
- Pickups parts
- Electronics
- Hardware
- Pickguards - Control plates
- Bodies - Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case parts
- Bluegrass and ukulele instruments parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® resonators
- Jensen® speakers
- Aged parts
- Left handed parts
- Parts for 7 & 8 strings guitar
- Deals
Catalog
Routing bites & templates There are 29 products.
BIT FOR TEMPLATES 1/2 INCH DEPTH
1/2 BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
BIT FOR BINDINGS 1/16 INCH CHANNEL CUT
BINDING BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55in (14mm ) Bit shaft diameter = 1/4 in. Length of bit excluding shaft = 1.10 in. (28mm)
BIT FOR TEMPLATES 3/8 INCH DEPTH
BIT-3/8
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
BIT FOR TEMPLATES 3/4 INCH DEPTH
BIT-3/8-OD
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
BIT FOR CONTROL CAVITY LEDGE
CAVITY BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on. Bit shaft diameter = 1/4 in.
FRATER ROUTING TEMPLATE SINGLE PICKUP FOR PICKGUARDS
RTT02
FRATER ROUTING TEMPLATE SINGLE PICKUP FOR PICKGUARDS
FRATER ROUTING TEMPLATE TELE NECK PICKUP FOR PICKGUARDS
RTT03
FRATER ROUTING TEMPLATE TELE NECK PICKUP FOR PICKGUARDS
