Search
Categories
- Tuners
- Bridges - Tailpieces
- Tremolos
-
Pickups - Preamps - Piezo
- Electric Guitar Pickups
- Acoustic guitar pickups
- Bass Guitar Pickups & Preamps
- Ghost® modular pickup system by GRAPHTECH®
- Pickups covers
- Pickups rings
- Pickups parts
- Electronics
- Hardware
- Pickguards - Control plates
- Bodies - Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case parts
- Bluegrass and ukulele instruments parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® resonators
- Jensen® speakers
- Aged parts
- Left handed parts
Catalog
Frets There are 63 products.
0991997000
FENDER® STANDARD BASS FRETS MEDIUM JUMBO (24)
Fender® standard bass fret wire is pre-cut in 24-piece quantities pre-radiused to 9.5". Measurements: .046" tall, .103" wide. Cut for bass fingerboards. Dimensions 0.25x4.50x5.50 IN Poids 0.22 LB
0991998000
FENDER® STANDARD GUITAR FRETS MEDIUM JUMBO...
Fender® standard guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 9.5". Measurements: .046" tall, .103" wide. Cut for guitar fingerboards. Dimensions 0.85x6.00x5.00 IN Poids 0.10 LB
0991999000
FENDER® REPLACEMENT NARROW/TALL GUITAR...
Fender® jumbo guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 12". Measurements: .055" tall, .090" wide. Each piece is cut for guitar fingerboards. Dimensions 0.75x5.00x6.00 IN Poids 0.12 LB
0992014000
FENDER® VINTAGE-STYLE GUITAR FRET WIRE...
Fender® vintage-style guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Cut for guitar fingerboards. Dimensions 0.75x6.00x5.00 IN Poids 0.20 LB
0992015000
FENDER® VINTAGE-STYLE BASS REPLACEMENT...
Fender® vintage-style bass fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Each piece is approximately 2.375" long. Dimensions 0.25x4.50x5.50 IN Poids 0.20 LB
8018100-3052
SINTOMS® CUTTER FOR FRET MOUNTING INNER...
SINTOMS® CUTTER FOR FRET MOUNTING INNER DIAMETER 30mm AND TOOTH THICKNESS 0.52mm -Inner diameter : 30mm -Outer diameter : 80mm -Tooth thickness : 0.52mm -Material : High speed steel -Accuracy : 0.02mm -Cutter washer thickness : 1.8mm
FL37053
JESCAR® FRETWIRE 18% NICKEL SILVER 1.35 X...
JESCAR® FRETWIRE 18% NICKEL SILVER 1.35 X 0.94mm (2' / 60cm STRAIGHT LENGTH) This small/narrow fret wire is designed for mandolins and vintage banjos.
FL39106-236
JESCAR® FRETWIRE 18% NICKEL SILVER 2.69 X...
JESCAR® FRETWIRE 18% NICKEL SILVER 2.69 X 0.99mm (2' / 60cm STRAIGHT LENGTH) Low and wide fret for that “fretless wonder” feel. Note the extra wide tang width.
FL43080
JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X...
JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.
FL43080-EVO
JESCAR® FRETWIRE EVO GOLD 2.03 X 1.09mm...
JESCAR® FRETWIRE EVO GOLD 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.
FL43080-S
JESCAR® FRETWIRE STAINLESS STEEL 2.03 X...
JESCAR® FRETWIRE STAINLESS STEEL 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.
FL45100
JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X...
JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.14mm (2' / 60cm STRAIGHT LENGTH) A nice low/wide fret wire. Standard issue at the Gibson Custom Shop.
