Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® Resonators
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Coil There are 6 products.
SCHATTEN® HEAVY FORMVAR COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
FCW42
Used widely in vintage single coil pickups from the '50s and '60, and commonly used today in many custom-shop and reissue guitar pickups. The copper wire insulation is made from a Heavy Formvar enamel. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal...
SCHATTEN® MODERN COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
MCW42
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each...
SCHATTEN® MODERN COIL WIRE 43 GAUGE (ENV 0.0056mm - 250GR - 9900 METRES)
MCW43
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
SCHATTEN® MODERN COIL WIRE 44 GAUGE (ENV 0.0051mm - 250GR - 12480 METRES)
MCW44
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 44 gauge - Finer still than 43 gauge, this wire has a nominal diameter of 0.0020". Each half pound spool contains approximately 41,600 feet of wire.
SCHATTEN® VINTAGE COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
VCW42
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each half pound spool contains approximately 25,000 feet...
SCHATTEN® VINTAGE COIL WIRE 43 GAUGE (ENV 0.0056mm - 250GR - 9900 METRES)
VCW43
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
