Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Guitares à Résonateur Dan Armstrong®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Catalogue
Coil Il y a 6 produits.
SCHATTEN® HEAVY FORMVAR COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
FCW42
Used widely in vintage single coil pickups from the '50s and '60, and commonly used today in many custom-shop and reissue guitar pickups. The copper wire insulation is made from a Heavy Formvar enamel. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal...
SCHATTEN® MODERN COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
MCW42
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each...
SCHATTEN® MODERN COIL WIRE 43 GAUGE (ENV 0.0056mm - 250GR - 9900 METRES)
MCW43
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
SCHATTEN® MODERN COIL WIRE 44 GAUGE (ENV 0.0051mm - 250GR - 12480 METRES)
MCW44
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 44 gauge - Finer still than 43 gauge, this wire has a nominal diameter of 0.0020". Each half pound spool contains approximately 41,600 feet of wire.
SCHATTEN® VINTAGE COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
VCW42
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each half pound spool contains approximately 25,000 feet...
SCHATTEN® VINTAGE COIL WIRE 43 GAUGE (ENV 0.0056mm - 250GR - 9900 METRES)
VCW43
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
