Fraises & Gabarits

Rechercher

Catégories

Catalogue

Fabricant

Fraises & Gabarits Il y a 45 produits.

par page
Résultats 1 - 12 sur 45.

1/2 BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.

50,00 € TTC (prix public conseillé)

BINDING BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55 in. Bit shaft diameter = 1/4 in.

36,67 € TTC (prix public conseillé)

BIT-3/8

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8 in. per pass. Bit diameter = 1/2 in. Bit shaft diameter = 1/4 in.

50,00 € TTC (prix public conseillé)

BIT-3/8-OD

This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4 in. per pass. Bit diameter = 3/8 in. Bit shaft diameter = 1/4 in.

54,17 € TTC (prix public conseillé)

BUSH-TEMP52

FRATER BUSHING TEMPLATE E/A 52mm

10,00 € TTC (prix public conseillé)

BUSH-TEMP54

FRATER BUSHING TEMPLATE E/A 54mm

10,00 € TTC (prix public conseillé)

CAVITY BIT

These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on.

45,83 € TTC (prix public conseillé)

ET-TEMPLATE

EVERTUNE F&T TEMPLATE Combo Pack. Includes plastic templates and all hardware. Minimum Body thickness for an F&T install is 1 3/4”. Any guitar body thickness less than 1 3/4” will require the foot plate to be installed on top of a custom back plate riser to ensure proper positioning of the modules.

165,83 € TTC (prix public conseillé)
New Deal
En réapprovisionnement

ET-TEMPLATE-G

EVERTUNE G TEMPLATE Includes plastic templates and all hardware. The guitar body has to be 2.1” to do a standard G model installation where you recess the two back plate covers on the back of the guitar. Any guitar that requires a G model bridge with a body thickness of less than 2.1” will be a route through body installation and will require a F or T...

165,83 € TTC (prix public conseillé)
5,08 € TTC (prix public conseillé)
Résultats 1 - 12 sur 45.