Liste de produits par fabricant Duesenberg

par page
Résultats 1 - 12 sur 19.

DPE-WD2

Sur commande uniquement

*DUESENBERG WHITE DRIVE II (OVERDRIVE/BOOSTER)

215,83 € TTC
(prix public conseillé)

H12SC

Sur commande uniquement

*DUESENBERG STOP TAILPIECE FOR 12-STR CHROME

20,83 € TTC
(prix public conseillé)

HW10A

En réapprovisionnement

The better sound because aluminum is used instead of zinc! Post spacing 81.5mm.

37,50 € TTC
(prix public conseillé)

HW10AB

En stock

The better sound because aluminum is used instead of zinc! Post spacing 81.5mm.

40,83 € TTC
(prix public conseillé)

HWD3C

Sur commande uniquement

Direct vibration transmission without loss of energy, an exceptionally sustain-rich, dynamically & responsive sound. The string riders are made of stainless steel! The top follows the fretboard radius, so even with the stop tailpiece set low, the outer strings no longer rest on the back! The intonation is adjusted with hexagon screws point in the...

51,67 € TTC
(prix public conseillé)

HWD3G

Sur commande uniquement

Direct vibration transmission without loss of energy, an exceptionally sustain-rich, dynamically & responsive sound. The string riders are made of stainless steel! The top follows the fretboard radius, so even with the stop tailpiece set low, the outer strings no longer rest on the back! The intonation is adjusted with hexagon screws point in the...

65,83 € TTC
(prix public conseillé)

HWD3N

En stock

Direct vibration transmission without loss of energy, an exceptionally sustain-rich, dynamically & responsive sound. The string riders are made of stainless steel! The top follows the fretboard radius, so even with the stop tailpiece set low, the outer strings no longer rest on the back! The intonation is adjusted with hexagon screws point in the...

51,67 € TTC
(prix public conseillé)

MDBLB

En stock

The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. By turning loose the hex screw the tuner is totally separatable and can be relubricated. Perfect! These tuners come by...

10,00 € TTC
(prix public conseillé)

MDBLC

En stock

The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. By turning loose the hex screw the tuner is totally separatable and can be relubricated. Perfect! These tuners come by...

10,00 € TTC
(prix public conseillé)

MDBLG

En stock

The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. By turning loose the hex screw the tuner is totally separatable and can be relubricated. Perfect! These tuners come by...

12,50 € TTC
(prix public conseillé)

MDBRB

En stock

The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. By turning loose the hex screw the tuner is totally separatable and can be relubricated. Perfect! These tuners come by...

10,00 € TTC
(prix public conseillé)

MDBRC

En stock

The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. By turning loose the hex screw the tuner is totally separatable and can be relubricated. Perfect! These tuners come by...

10,00 € TTC
(prix public conseillé)
Résultats 1 - 12 sur 19.