Rechercher
Catégories
- Mécaniques
- Chevalets - Cordiers
- Vibratos
-
Micro - Preamps - Piezo
- Micros guitare électrique
- Micros pour électro-acoustique
- Micros & Préamplis basse
- Système midi-piezo ghost® par GRAPHTECH®
- Capots micros
- Contours micros
- Pièces détachées micros
- Électronique
- Accastillage
- Pickguards et plaques de contrôle
- Corps - Manches
- Lutherie
- Cordes
- Accessoires
- FENDER®
- DUESENBERG
- SANDBERG
- DAN ARMSTRONG resonator
- JENSEN speakers
- Aged parts
- Amp & Case parts
- Autres instruments
- Pièces gauchers
H-NF-036
HOSCO BLACK NUT FILE .036 / LIME A...
HOSCO BLACK NUT FILE .036" / LIME A SILLET.036" (FOR H-NF-H)
(prix public conseillé)
ABRH-GAN
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED GOLD, NYLON SADDLES aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of the Nashville...
(prix public conseillé)
TP-59NA
FABER TAILPIECE BRIDGE 59 VINTAGE ALU,...
It is an extremely lightweight, nickel-plated tailpiece, available in a glossy polished version or in “aged” There's no need to replace your current tailpiece studs, the new tailpiece will fit perfectly and provide a tight connection. WITHOUT STUDS
(prix public conseillé)
PC-85
ARTEC® UNDER SADDLE FLEXIBLE BRAIDED PIEZO...
ARTEC® UNDER SADDLE FLEXIBLE BRAIDED PIEZO PICKUP FOR ACOUSTIC GUITAR 85mm LONG -Piezo cable length : 85mm -Diameter : 1.7mm
(prix public conseillé)
FKT33SBT-GG
FABER GIBSON® STYLE TUNERS, TULIP,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style pearloid plastic keystone tuning keys. 15:1 gear ratio.
(prix public conseillé)
H-NF-013
HOSCO BLACK NUT FILE .013 / LIME A...
HOSCO BLACK NUT FILE .012" / LIME A SILLET.012" (FOR H-NF-H)
(prix public conseillé)
FKT33BB-GA
FABER GIBSON® STYLE TUNERS, TULIP, NUT,...
Set of six 3×3 (3 per side) tuners. Solid performance DIECAST high ratio, using hex head screw in bushings instead of press in ferrules, with vintage style pearloid plastic tuning keys. 15:1 gear ratio.
(prix public conseillé)
ABRH-GG
FABER BRIDGE ABRH, FOR GIBSON® ABR-1,...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, GOLD, BRASS SADDLES GOLD aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of the Nashville...
(prix public conseillé)
FKT33SBT-NG
FABER GIBSON® STYLE TUNERS, TULIP,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style pearloid plastic keystone tuning keys. 15:1 gear ratio.
(prix public conseillé)
MM4CBC
BARTOLINI MM4CBC MUSIC MAN, 4-STRING,...
4-String, Music Man, Classic Bass, Dual Coil Classic Bass series upgrade pickups make you sound better, so you play better. They have a rich, deep voice with lots of high-end clarity and warmth. When you dig in, they are responsive and growly. When you pull back, they are clear and sweet. And they’ll take any slapping and popping you want to give them....
(prix public conseillé)
ABRH-NA
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED NICKEL, BRASS SADDLES NICKEL AGED aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of...
(prix public conseillé)
BG07TG
ARCHTOP BRIDGE ROSEWOOD BASE WITH GOTOH®...
ARCHTOP BRIDGE ROSEWOOD BASE WITH GOTOH® TUNOMATIC INSTALLED GOLD Base : 138 x 12mm Bridge : GOTOH® GE104B String Spacing : 10.40mm
(prix public conseillé)
N12K 8
12 JENSEN VINTAGE NEO 8 OHMS 100W
The Jensen N 12 K - 100W, 12”, 2” Voice Coil, Seamed Cone Membrane, Neodymium Magnet. The N12K is born from the development process that Jensen did for the speaker in use in the new Fender® Tone Master® Deluxe Reverb® and Twin Reverb®. The goal was to develop a speaker with the closest possible sound, character and feel to the classic Jensen C12K, one of...
(prix public conseillé)
PMO
NECK FOR PRECISION BASS® 1 PIECE MAPLE 20...
NECK FOR PRECISION BASS® 1 PIECE MAPLE 20 FRETS LBF UNFINISHED 20 frets (.103" x .045") Solid 1-piece Maple bass neck with black inlay dots, sanded, unfinished and ready to spray 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole diameter 11/16" Truss Rod adjustment at heel Neck thickness .88" at first fret, 1.01" at twelfth fret
(prix public conseillé)
0991803021
FENDER® 351 WALL HANGER MAPLE
Showcase your favorite piece of gear in an unmistakably Fender fashion! The 351 Guitar Hanger is a stylish and secure way to let the world know you’re ready to play. Available in three wood variations, including one tortoiseshell pickguard covered option, these hangers are crafted from durable materials to ensure your instrument can be safely mounted for...
(prix public conseillé)
PC5 HE/M2
*DELANO P.BASS 5 STRINGS SPLIT COIL HUMB...
The DELANO PC 5 HE/M2 split coil humbucker stands for enhanced low end and crisp upper brilliance. One pickup half carries the signal of the low- B, E, and A strings while the other half is taking care of the D and G strings, always maintaining full humbucking operation. Meaty dimensional 5-string P-bass® tone with outstanding clarity and dynamics....
(prix public conseillé)
FKT33SBT-GA
FABER GIBSON® STYLE TUNERS, TULIP,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style pearloid plastic keystone tuning keys. 15:1 gear ratio.
(prix public conseillé)
H-NF-032
HOSCO BLACK NUT FILE .032 / LIME A...
HOSCO BLACK NUT FILE .032" / LIME A SILLET.032" (FOR H-NF-H)
(prix public conseillé)
H-NWT-600D
HOSCO® 600 DIAMOND GRIT SHEETS FOR NUT...
HOSCO® 600 DIAMOND GRIT SHEETS FOR NUT WORK TABLE H-NWT (3pcs) Sheet 1 : 35 x 180mm Sheet 2 : 4 x 180mm Sheet 3 : 10 x 180mm
(prix public conseillé)
0990630001
FENDER® UKULELE STRAP
Portez votre ukulélé avec le confort et le style caractéristiques de Fender grâce à cette sangle de 25 mm de largeur spécialement conçue pour les ukulélés. Fabriquée en polyester résistant et réglable entre 60,9 et 83,8 cm, elle ravira tous(tes) les musiciens(nes).
(prix public conseillé)
HWTTC
GOLDO T-STYLE VIBROBRIDGE CHROME
In combination with classic top-mount tremolo systems like Duesenberg Diamond Deluxe, göldo G5, and similar. The bridge itself has all the important vintage features - i.e. steel as the base material and three brass saddles that provide the typical twang. The saddles are also flattened at the bottom to have a larger adjustment range for the height. The...
(prix public conseillé)
BG07T
ARCHTOP BRIDGE ROSEWOOD BASE WITH GOTOH®...
ARCHTOP BRIDGE ROSEWOOD BASE WITH GOTOH® TUNOMATIC INSTALLED NICKEL Base : 138 x 12mm Bridge : GOTOH® GE104B String Spacing : 10.40mm
(prix public conseillé)
0990654020
FENDER® GUITAR et BASS MULTI-TOOL
Fender's Guitar & Bass Multi-Tool is a 14-in-1 compact tool designed for use with Fender models as well as virtually any other make or model. Its one-piece body allows for ease of use and rotation while the included truss rod size hex wrenches are ball end for easy access. Featuring standard and metric sizing, this multi-tool serves as a toolbox in...
(prix public conseillé)
TPWC-59NG
FABER WRAPAROUND 59 VINTAGE ALU,...
TPWC-'59 Vintage Spec ALUMINIUM COMPENSATED WRAPAROUND Tailpiece: Lightweight aluminum compensated wraparound tailpiece based on a historic correct '59. Tired of playing only to the 7th fret? This is the solution! Put one on your vintage guitar to get perfect intonation, while storing and preserving your original. Allen screws on both sides, comes with...
(prix public conseillé)
TP-59GA
FABER TAILPIECE BRIDGE 59 VINTAGE ALU,...
It is an extremely lightweight, nickel-plated tailpiece, available in a glossy polished version or in “aged” There's no need to replace your current tailpiece studs, the new tailpiece will fit perfectly and provide a tight connection. WITHOUT STUDS
(prix public conseillé)
FKT33BB-GG
FABER GIBSON® STYLE TUNERS, TULIP, NUT, GOLD
Set of six 3×3 (3 per side) tuners. Solid performance DIECAST high ratio, using hex head screw in bushings instead of press in ferrules, with vintage style pearloid plastic tuning keys. 15:1 gear ratio.
(prix public conseillé)
FKT33SBT-NA
FABER GIBSON® STYLE TUNERS, TULIP,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style pearloid plastic keystone tuning keys. 15:1 gear ratio.
(prix public conseillé)
LF0025SS
SINTOMS® FRETWIRE STAINLESS STEEL 2.50 x...
SINTOMS® FRETWIRE STAINLESS STEEL 2.50 x 1.18mm (SET 6x26cm) SINTOMS® FRET CODE : SS250118F w.p.
(prix public conseillé)
ABRH-NAN
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, AGED NICKEL, NYLON SADDLES aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of the...
(prix public conseillé)
TP-59GG
FABER TAILPIECE BRIDGE 59 VINTAGE ALU, GOLD
It is an extremely lightweight, nickel-plated tailpiece, available in a glossy polished version or in “aged” There's no need to replace your current tailpiece studs, the new tailpiece will fit perfectly and provide a tight connection. WITHOUT STUDS
(prix public conseillé)
ABRH-NG
FABER BRIDGE ABRH, FOR GIBSON® ABR-1,...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, NICKEL, BRASS SADDLES NICKEL aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of the...
(prix public conseillé)
H-NF-010
HOSCO BLACK NUT FILE .010 / LIME A...
HOSCO BLACK NUT FILE .010" / LIME A SILLET.010" (FOR H-NF-H)
(prix public conseillé)
H-NF-130
HOSCO BLACK NUT FILE .130 / LIME A...
HOSCO BLACK NUT FILE .105" / LIME A SILLET.105" (FOR H-NF-H)
(prix public conseillé)
H-NF-046
HOSCO BLACK NUT FILE .046 / LIME A...
HOSCO BLACK NUT FILE .046" / LIME A SILLET.046" (FOR H-NF-H)
(prix public conseillé)
0991803023
FENDER® 351 WALL HANGER BLACK
Showcase your favorite piece of gear in an unmistakably Fender fashion! The 351 Guitar Hanger is a stylish and secure way to let the world know you’re ready to play. Available in three wood variations, including one tortoiseshell pickguard covered option, these hangers are crafted from durable materials to ensure your instrument can be safely mounted for...
(prix public conseillé)
H-NF-105
HOSCO BLACK NUT FILE .105 / LIME A...
HOSCO BLACK NUT FILE .105" / LIME A SILLET.105" (FOR H-NF-H)
(prix public conseillé)
0996103921
FENDER® STANDARD SERIES PRECISION BASS®...
Crafted at our Ensenada, Mexico manufacturing facility, this genuine Fender® Precision Bass® neck features a comfortable "C"-shaped profile and 9.5"-radius pau ferro fingerboard with 20 medium jumbo frets. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. This replacement neck is the...
(prix public conseillé)
H-NF-024
HOSCO BLACK NUT FILE .024 / LIME A...
HOSCO BLACK NUT FILE .024" / LIME A SILLET.024" (FOR H-NF-H)
(prix public conseillé)
H-NF-065
HOSCO BLACK NUT FILE .065 / LIME A...
HOSCO BLACK NUT FILE .065" / LIME A SILLET.065" (FOR H-NF-H)
(prix public conseillé)
FKT33SBR-NA
FABER KLUSON® STYLE TUNERS, ROUND KNOB,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style '50 round metal knob 15:1 gear ratio.
(prix public conseillé)
0991712921
FENDER® ROAD WORN® '50'S PRECISION BASS®...
Nitrocellulose lacquer is a vintage-accurate finish that wears gradually over time, creating a pleasantly worn-in appearance with use. Our Road Worn® Nitro finish is hand-distressed to faithfully recreate the look and feel of a well-loved vintage instrument. This genuine Fender Precision Bass neck is crafted at our Ensenada, Mexico manufacturing facility....
(prix public conseillé)
H-NF-016
HOSCO BLACK NUT FILE .016 / LIME A...
HOSCO BLACK NUT FILE .016 / LIME A SILLET.016 (FOR H-NF-H)
(prix public conseillé)
TP-59NG
FABER TAILPIECE BRIDGE 59 VINTAGE ALU, NICKEL
It is an extremely lightweight, nickel-plated tailpiece, available in a glossy polished version or in “aged” There's no need to replace your current tailpiece studs, the new tailpiece will fit perfectly and provide a tight connection. WITHOUT STUDS
(prix public conseillé)
H-NWT
HOSCO® NUT AND SADDLE WORK TABLE
HOSCO® NUT AND SADDLE WORK TABLE -Weight : 1.08Kg -Overall size : 180 x 60 x 15mm -Surface 1 : 35 x 180mm -Surface 2 : 4 x 180mm -Surface 3 : 10 x 180mm Flat table and 90° angles are precisely processed by CNC machine. Replacement diamond sheets 600 grit available : H-NTW-600D
(prix public conseillé)
GLN-7B
GOTOH® GLN-7 LOCKNUT FOR 7 STRINGS TOP...
GOTOH® GLN-7 LOCKNUT FOR 7 STRINGS TOP MOUNT TYPE 43mm AND STRING RETAINER BLACK Width : 48mm Radius : 400mm
(prix public conseillé)
F001B-40
FLOYD ROSE ORIGINAL BLACK 40TH ANNIVERSARY...
FLOYD ROSE ORIGINAL BLACK 40TH ANNIVERSARY (SET) (R3/37mm) FAT BRASS BLOCK 37 MM TITANIUM STRING LOCK INSERT BLOCKS FINE TUNING RUBY RED
(prix public conseillé)
H-NF-054
HOSCO BLACK NUT FILE .054 / LIME A...
HOSCO BLACK NUT FILE .054" / LIME A SILLET.054" (FOR H-NF-H)
(prix public conseillé)
0054471049
FENDER® AMERICAN ORIGINAL...
Keep your guitar in optimal working condition with a Genuine Fender American Vintage Jaguar/Jazzmaster tremolo arm holder sleeve.
(prix public conseillé)
H-NF-012
HOSCO BLACK NUT FILE .012 / LIME A...
HOSCO BLACK NUT FILE .012" / LIME A SILLET.012" (FOR H-NF-H)
(prix public conseillé)
GLN-7C
GOTOH® GLN-7 LOCKNUT 7 STRINGS TOP MOUNT...
GOTOH® GLN-7 LOCKNUT FOR 7 STRINGS TOP MOUNT TYPE 43mm AND STRING RETAINER CHROME Width : 48mm Radius : 400mm
(prix public conseillé)
0012156049
FENDER® BOLT, MICRO TILT NECK ADJUST,...
FENDER® BOLT, MICRO TILT NECK ADJUST, 1/4-28X1-9/16, NICKEL (1)
(prix public conseillé)
NTTMC
STRING RETAINERS FENDER® AMERICAN...
STRING RETAINERS FENDER® AMERICAN STANDARD® STYLE CHROME (2pcs)
(prix public conseillé)
FKT33BB-NG
FABER GIBSON® STYLE TUNERS, TULIP, NUT,...
Set of six 3×3 (3 per side) tuners. Solid performance DIECAST high ratio, using hex head screw in bushings instead of press in ferrules, with vintage style pearloid plastic tuning keys. 15:1 gear ratio.
(prix public conseillé)
FKT33BB-NA
FABER GIBSON® STYLE TUNERS, TULIP, NUT,...
Set of six 3×3 (3 per side) tuners. Solid performance DIECAST high ratio, using hex head screw in bushings instead of press in ferrules, with vintage style pearloid plastic tuning keys. 15:1 gear ratio.
(prix public conseillé)
H-NF-042
HOSCO BLACK NUT FILE .042 / LIME A...
HOSCO BLACK NUT FILE .042" / LIME A SILLET.042" (FOR H-NF-H)
(prix public conseillé)
H-NF-085
HOSCO BLACK NUT FILE .085 / LIME A...
HOSCO BLACK NUT FILE .085" / LIME A SILLET.085" (FOR H-NF-H)
(prix public conseillé)
0994603921
FENDER® STANDARD SERIES STRATOCASTER® NECK...
Cet authentique manche de guitare Fender Stratocaster® en érable est fabriqué dans notre usine d’Ensenada au Mexique. Il présente un confortable profil ”Modern C” et une touche en érable au radius de 9,5” (241 mm) avec 21 frettes medium jumbo. Le sillet de tête présente des gorges "pilotes" pré-taillées qui facilitent l'espacement des cordes lors du...
(prix public conseillé)
0995122921
FENDER® STANDARD SERIES TELECASTER® LH...
fingerboard with 21 medium jumbo frets. Also includes standard truss rod and pre-slotted synthetic bone nut. Tinted satin urethane finish on back for smooth feel, with gloss-finish fingerboard and headstock face. Crafted at Fender’s Ensenada, Mexico, manufacturing facility. This replacement neck is for a Fender or Squier® by Fender guitar. Specifications...
(prix public conseillé)
FKT33SBR-NG
FABER KLUSON® STYLE TUNERS, ROUND KNOB,...
Set of six 3×3 (3 per side) tuners. Traditional stamped steel style with press in ferrules (direct replacement for many Gibson® guitars), with vintage style '50 round metal knob 15:1 gear ratio.
(prix public conseillé)
ABRH-GA
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, GOLD...
FABER BRIDGE ABRH, FOR GIBSON® ABR-1, GOLD AGED, BRASS SADDLES GOLD AGED aber® ABRH Bridge: For Gibson Historic and original ABR-1 (6-32) size bridge posts. Use this ABRH model bridge on your Gibson Historic or any guitar using ABR-1 sized (6-32) bridge posts, including most original "tune-o-matic" equipped Gibson guitars prior to the introduction of the...
(prix public conseillé)
FRXNBP
FLOYD ROSE FRX NYLON BALL POST
Nylon tremolo stabilizer ball post for the FRX Surface-Mounting Tremolo System.
(prix public conseillé)
H-NF-028
HOSCO BLACK NUT FILE .028 / LIME A...
HOSCO BLACK NUT FILE .028" / LIME A SILLET.028" (FOR H-NF-H)
(prix public conseillé)
