Search

Categories

    V97-18GA

    In Stock

    GROVER V97-18GA STA-TITE 3X3 SCALLOPED BUTTON GOLD 1:18

    90,83 € tax incl.
    (recommended public price)

    You must be logged

    SP-PMF-BN

    Special order only

    Reprenant l'architecture originale des premiers mini-humbuckers, ils conservent leur caractère particulier et original des meilleurs mini-humbuckers ainsi que leur attaque si spécifique. Du gros rock, du hard rock, du blues ... Ils ont le grain, ils ne leur manque que les mains, parcequ'attention, ils retranscrivent toutes les nuances de jeu et du coup ne...

    104,17 € tax incl.
    (recommended public price)

    You must be logged

    FL45100

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.14mm (2' / 60cm STRAIGHT LENGTH) A nice low/wide fret wire. Standard issue at the Gibson Custom Shop.

    3,75 € tax incl.
    (recommended public price)

    You must be logged

    0037429049

    In resupplying

    Jeu de six mécaniques bloquantes qui assurent une tenue de l'accordage optimale ; compatibles avec la plupart des modèles Stratocaster et Telecaster fabriqués aux U.S.A et au Mexique (ne sont pas compatibles avec les instruments de série American Vintage). Rondelles, boutons de mécaniques amovibles et matériel de montage inclus.

    4,00 € tax incl.
    (recommended public price)

    You must be logged

    WK-LP-PAGE

    In Stock

    LES PAUL® WIRING KIT - SWITCHCRAFT JACK - PUSH-PULL POTS - SWITCHCRAFT TOGGLE SWITCH - MALLORY MUSTARD CAPACITORS

    44,05 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU50-C

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 50mm STRING SPACING CREAM -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    0,95 € tax incl.
    (recommended public price)

    You must be logged

    TOP-CFM3

    In Stock

    TOP AAAA CIRCULAR FLAMED MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    FW45100

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.54 X 1.14mm (1 POUND / 0.454 KG COIL) A nice low/wide fret wire. Standard issue at the Gibson Custom Shop.

    51,67 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR50-C

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 50mm STRING SPACING CREAM -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    WK-LP

    In Stock

    LES PAUL® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - SWITCHCRAFT TOGGLE SWITCH - MALLORY MUSTARD CAPACITORS

    53,05 € tax incl.
    (recommended public price)

    You must be logged

    0737250406

    In Stock

    Les cordes Fender 7250 en acier plaqué nickel combinent le haut niveau de volume et le son dynamique de l'acier, au toucher tout en douceur du nickel. Ces cordes à filets ronds sont brillantes et dynamiques. Elles sont parfaites pour le rock, le blues, et bien d'autres styles. Vous ne trouverez pas meilleure solution pour faire briller votre personnalité...

    18,33 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU53-B

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 52.8mm STRING SPACING BLACK -String spacing : 52.8mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    FW43080

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (1 POUND / 0.454 KG COIL) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.

    51,67 € tax incl.
    (recommended public price)

    You must be logged

    WK-PB

    In Stock

    JAZZ BASS® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - MALLORY MUSTARD CAPACITOR

    17,75 € tax incl.
    (recommended public price)

    You must be logged

    H-NWT-600D

    In resupplying

    HOSCO® 600 DIAMOND GRIT SHEETS FOR NUT WORK TABLE H-NWT (3pcs) Sheet 1 : 35 x 180mm Sheet 2 : 4 x 180mm Sheet 3 : 10 x 180mm

    30,83 € tax incl.
    (recommended public price)

    You must be logged

    FS47104-NS

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.64 X 1.19mm (25 PCS SET / 10" RADIUS) For over 20 years one of the most popular frets for guitars and basses. As used by PRS, Ernie Ball, and many others. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    13,75 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR53-B

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 52.8mm STRING SPACING BLACK -String spacing : 52.8mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    DM-DP155B-BSCB

    In Stock

    DIMARZIO TONE ZONE DP155 BRIDGE BLACK COVER / BLACK POLES OEM VERSION

    58,33 € tax incl.
    (recommended public price)

    You must be logged

    0996103921

    In Stock

    Crafted at our Ensenada, Mexico manufacturing facility, this genuine Fender® Precision Bass® neck features a comfortable "C"-shaped profile and 9.5"-radius pau ferro fingerboard with 20 medium jumbo frets. The synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. This replacement neck is the...

    249,99 € tax incl.
    (recommended public price)

    You must be logged

    0991622406

    In Stock

    La housse Fender de Série F1225 est la solution ultime pour protéger votre guitare électrique lors de vos déplacements. Reprenant la mythique forme asymétrique de nos instruments, sa solide couche extérieure est confectionnée en polyester 1 200 Deniers très résistant qui protège des impacts sans risque de griffure ou d’égratignure. Son intérieur est...

    82,50 € tax incl.
    (recommended public price)

    You must be logged

    ET-TEMPLATE-G

    In Stock

    EVERTUNE G TEMPLATE Includes plastic templates and all hardware. The guitar body has to be 2.1” to do a standard G model installation where you recess the two back plate covers on the back of the guitar. Any guitar that requires a G model bridge with a body thickness of less than 2.1” will be a route through body installation and will require a F or T...

    157,50 € tax incl.
    (recommended public price)

    You must be logged

    DM-DP155B-BSCN

    In Stock

    DIMARZIO TONE ZONE DP155 BRIDGE BLACK COVER / NICKEL POLES OEM VERSION

    58,33 € tax incl.
    (recommended public price)

    You must be logged

    EMG-60

    In Stock

    EMG 60 BLACK PICKUP OEM VERSION

    58,33 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR53-C

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 52.8mm STRING SPACING CREAM -String spacing : 52.8mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU50-W

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 50mm STRING SPACING WHITE -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    WK-335

    In resupplying

    ES-335® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - SWITCHCRAFT TOGGLE SWITCH - MALLORY MUSTARD CAPACITORS

    46,46 € tax incl.
    (recommended public price)

    You must be logged

    FS43080-NS

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (25 PCS SET / 10" RADIUS) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    12,42 € tax incl.
    (recommended public price)

    You must be logged

    FL47104

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.64 X 1.19mm (2' / 60cm STRAIGHT LENGTH) For over 20 years one of the most popular frets for guitars and basses. As used by PRS, Ernie Ball, and many others.

    3,50 € tax incl.
    (recommended public price)

    You must be logged

    0991002921

    In Stock

    Cet authentique manche de guitare Fender Stratocaster® en érable est fabriqué dans notre usine d’Ensenada au Mexique. Il présente un profil ”Soft V” très confortable et une touche en érable au radius de 7,25” (184 mm) avec 21 frettes de style vintage. Le sillet de tête présente des gorges "pilotes" pré-taillées qui facilitent l'espacement des cordes lors...

    325,00 € tax incl.
    (recommended public price)

    You must be logged

    EMG-85

    In Stock

    EMG 60 BLACK PICKUP OEM VERSION

    58,33 € tax incl.
    (recommended public price)

    You must be logged

    TOP-IR3

    In Stock

    TOP INDIAN ROSEWOOD 530X 190X 30X 2

    132,50 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR49-C

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 49.2mm STRING SPACING CREAM -String spacing : 49.2mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    0990606049

    In resupplying

    Pick 'N' Strap Assortment, Package of 12

    40,83 € tax incl.
    (recommended public price)

    You must be logged

    FL43080

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.

    3,33 € tax incl.
    (recommended public price)

    You must be logged

    FL43080-EVO

    In Stock

    JESCAR® FRETWIRE EVO GOLD 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.

    7,25 € tax incl.
    (recommended public price)

    You must be logged

    0018371049

    In Stock

    De nombreuses pièces de rechange Fender Pure Vintage sont usinées, lorsque cela est possible, avec les mêmes outillages et machines qui ont servi à fabriquer nos composants originaux. Que vous souhaitiez personnaliser, modifier ou restaurer votre matériel, c’est la meilleure solution pour faire perdurer la longue histoire et conserver l’authenticité de...

    8,00 € tax incl.
    (recommended public price)

    You must be logged

    FL57110-EVO

    In Stock

    JESCAR® FRETWIRE EVO GOLD 2.79 X 1.45mm (2' / 60cm STRAIGHT LENGTH) The classic Jumbo fret wire as used by PRS and most of the modern metal guitar manufacturers.

    9,17 € tax incl.
    (recommended public price)

    You must be logged

    PMO

    In resupplying

    NECK FOR PRECISION BASS® 1 PIECE MAPLE 20 FRETS LBF UNFINISHED 20 frets (.103" x .045") Solid 1-piece Maple bass neck with black inlay dots, sanded, unfinished and ready to spray 10" radius Nut width 1.5" Heel width 2-7/16" Tuning peg hole diameter 11/16" Truss Rod adjustment at heel Neck thickness .88" at first fret, 1.01" at twelfth fret

    213,33 € tax incl.
    (recommended public price)

    You must be logged

    H-NWT

    In resupplying

    HOSCO® NUT AND SADDLE WORK TABLE -Weight : 1.08Kg -Overall size : 180 x 60 x 15mm -Surface 1 : 35 x 180mm -Surface 2 : 4 x 180mm -Surface 3 : 10 x 180mm Flat table and 90° angles are precisely processed by CNC machine. Replacement diamond sheets 600 grit available : H-NTW-600D

    145,83 € tax incl.
    (recommended public price)

    You must be logged

    0239978000

    In Stock

    Pratique et peu encombrant, l’accordeur à pince multifonctions FT-1 vous aidera à vérifier que votre instrument est toujours parfaitement accordé, même sur les scènes les plus sombres. Grâce à son capteur de vibrations intégré, il ne sera pas dérangé par les environnements bruyants. L’aiguille de l’écran LCD est facile à lire : elle indique à quelle...

    9,92 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU49-B

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 49.2mm STRING SPACING BLACK -String spacing : 49.2mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU50-B

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 50mm STRING SPACING BLACK -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU53-C

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 52.8mm STRING SPACING CREAM -String spacing : 52.8mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    SC-G3P-R62

    In Stock

    PICKGUARD FOR STRAT® 62' SSS 3-PLY 11 HOLES JAPAN AGED MINT

    23,33 € tax incl.
    (recommended public price)

    You must be logged

    LQ-9210-10

    In Stock

    The LQ-9210-10 is a great option to replace or upgrade the saddle on your classical guitar. It is 13/32"" tall and is compensated to help improve the playability of your guitar.

    64,17 € tax incl.
    (recommended public price)

    You must be logged

    EMG-SLV

    In Stock

    EMG KIT STEVE LUKATHER 2XSLV + 1X 85 BLACK OEM SET PICKUPS

    165,83 € tax incl.
    (recommended public price)

    You must be logged

    WK-LP-EPI

    In resupplying

    EPIPHONE LES PAUL® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - SWITCHCRAFT TOGGLE SWITCH - MALLORY MUSTARD CAPACITORS

    45,72 € tax incl.
    (recommended public price)

    You must be logged

    FS57110-NS

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (25 PCS SET / 10" RADIUS) The classic Jumbo fret wire as used by PRS and most of the modern metal guitar manufacturers. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    14,92 € tax incl.
    (recommended public price)

    You must be logged

    WK-SG

    In resupplying

    SG® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - SWITCHCRAFT TOGGLE SWITCH - MALLORY MUSTARD CAPACITORS

    46,96 € tax incl.
    (recommended public price)

    You must be logged

    PT-1578-00

    In resupplying

    The PT-1578-00 is a great option to upgrade or replace the nut on your 12 string guitar. It is 3/16" thick and is pre-slotted to make for a quick and simple install.

    8,25 € tax incl.
    (recommended public price)

    You must be logged

    PQ-1257-00

    In resupplying

    The PQ-1257-00 is the perfect option to upgrade the nut on your ukelele. It is pre-slotted for a quick and simple install.

    8,25 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR49-B

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 49.2mm STRING SPACING BLACK -String spacing : 49.2mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    PT-1215-00

    In Stock

    The PT-1215-00 is the perfect option to upgrade or replace the nut on your 4 string Fender Jazz style Bass guitar. It is pre-slotted so it will make for an easy install.

    8,25 € tax incl.
    (recommended public price)

    You must be logged

    TOP-CFM2

    In Stock

    TOP AAAA CIRCULAR FLAMED MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    CV90MNO

    In Stock

    This P-90 beauty ring protects the windings of the pick up while leaving the pole pieces and slugs exposed for greater sensitivity. This mounts to the pickup the same way as a P-90 cover does with tack soldering. Not to be confused with a trim ring. Solder and instructions not included.

    11,25 € tax incl.
    (recommended public price)

    You must be logged

    FL57110

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.79 X 1.45mm (2' / 60cm STRAIGHT LENGTH) The classic Jumbo fret wire as used by PRS and most of the modern metal guitar manufacturers.

    4,00 € tax incl.
    (recommended public price)

    You must be logged

    FL47095

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.41 X 1.19mm (2' / 60cm STRAIGHT LENGTH) Popular medium fret wire for electric guitars.

    3,50 € tax incl.
    (recommended public price)

    You must be logged
    Out of stock

    TOP-IR2

    Out of stock

    TOP INDIAN ROSEWOOD 530X 190X 30X 2

    132,50 € tax incl.
    (recommended public price)

    You must be logged

    FS47104-S

    In Stock

    JESCAR® FRETWIRE STAINLESS STEEL 2.64 X 1.19mm (25 PCS SET / 10" RADIUS) For over 20 years one of the most popular frets for guitars and basses. As used by PRS, Ernie Ball, and many others. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    20,75 € tax incl.
    (recommended public price)

    You must be logged

    WK-JZ

    In resupplying

    JAZZMASTER® WIRING KIT- SWITCHCRAFT JACK- CTS POTS- SWITCHCRAFT SWITCHES- MALLORY MUSTARD CAPACITORS

    60,55 € tax incl.
    (recommended public price)

    You must be logged

    FS55090-NS

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (25 PCS SET / 10" RADIUS) The classic 6105 as used by Gibson and Fender over the years. Tall/narrow electric guitar wire. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    13,75 € tax incl.
    (recommended public price)

    You must be logged

    0994944000

    In Stock

    Cet écrou cruciforme pour tige de réglage du manche de style vintage permet de garder le manche des guitares et des basses électriques bien droit. Il est compatible avec les instruments de séries American Vintage et Classic dont la tige de réglage du manche est accessible au niveau du talon.

    9,17 € tax incl.
    (recommended public price)

    You must be logged

    WK-JB

    In Stock

    JAZZ BASS® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - MALLORY MUSTARD CAPACITOR

    16,42 € tax incl.
    (recommended public price)

    You must be logged

    FL55090

    In Stock

    JESCAR® FRETWIRE 18% NICKEL SILVER 2.28 X 1.40mm (2' / 60cm STRAIGHT LENGTH) The classic 6105 as used by Gibson and Fender over the years. Tall/narrow electric guitar wire.

    3,58 € tax incl.
    (recommended public price)

    You must be logged

    H97-18GA

    In Stock

    GROVER H97-18GA STA-TITE 3X3 GOLD 1:18 (FOR SLOTTED HEAD)

    90,83 € tax incl.
    (recommended public price)

    You must be logged

    TOP-BM3

    In Stock

    TOP AAAA BURL MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    FL43080-S

    In Stock

    JESCAR® FRETWIRE STAINLESS STEEL 2.03 X 1.09mm (2' / 60cm STRAIGHT LENGTH) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics.

    5,33 € tax incl.
    (recommended public price)

    You must be logged

    TOP-BM2

    In Stock

    TOP AAAA BURL MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    ET001GN

    In Stock

    EVERTUNE BRIDGE G MODEL 6 STRINGS NICKEL For Gibson-style guitars. Ambidextrous. Every new EverTune bridge comes with a service pack. This includes an EverTune hex key (matched to the faceplate color), an extra set of action screws and a printed Owners Manual. If the installed set of action screws is 8mm then the service pack will have 10mm screws; if the...

    299,17 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR50-B

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 50mm STRING SPACING BLACK -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    1,25 € tax incl.
    (recommended public price)

    You must be logged

    FL47104-S

    In Stock

    JESCAR® FRETWIRE STAINLESS STEEL 2.64 X 1.19mm (2' / 60cm STRAIGHT LENGTH) For over 20 years one of the most popular frets for guitars and basses. As used by PRS, Ernie Ball, and many others.

    5,33 € tax incl.
    (recommended public price)

    You must be logged

    TOP-QM2

    In Stock

    TOP AAAA QUILTED MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    FRXNBP

    In resupplying

    Nylon tremolo stabilizer ball post for the FRX Surface-Mounting Tremolo System.

    2,08 € tax incl.
    (recommended public price)

    You must be logged

    9190160000

    In Stock

    Fender® is the world's leader in the field of musical instruments and guitar building. This calendar features 13 timeless classics that were produced at Fender®'s world-renowned Custom Shop, where master builders, engineers, technicians and woodworkers combine their talents to build a limited number of one-of-a-kind guitars each year.

    12,08 € tax incl.
    (recommended public price)

    You must be logged

    WK-ST

    In Stock

    STRAT WIRING KIT - SWITCHCRAFT JACK - CTS POTS - CRL SWITCH - MALLORY MUSTARD CAPACITORS

    39,24 € tax incl.
    (recommended public price)

    You must be logged

    0994945000

    In Stock

    To help keep '70s-style electric guitar and bass necks straight and true, Fender® offers genuine “Bullet”-style truss rod nuts. 1/8" hex adjusting head. Used in most '70s era and '70s reissue (US and Mexico) instruments with a headstock adjusting truss rod.

    9,17 € tax incl.
    (recommended public price)

    You must be logged

    0990691021

    In Stock

    Affichez votre style grâce à cette sangle de 50,8 mm de largeur en daim réversible ultra-doux. Avec son logo Fender ”Spaghetti” estampé comme gage de qualité, cette sangle est disponible en deux couleurs. Avec une longueur réglable entre 110,4 et 139,7 cm, cette sangle convient aux musiciens(nes) de toutes tailles.

    32,50 € tax incl.
    (recommended public price)

    You must be logged

    VPCN-12

    In Stock

    PICKUP COVER FOR HUMBUCKER NICKEL SILVER 12 HOLES 49.2mm

    10,00 € tax incl.
    (recommended public price)

    You must be logged

    WK-JR

    In Stock

    LES PAUL® JUNIOR / SG® JUNIOR WIRING KIT- SWITCHCRAFT JACK- CTS POTS- MALLORY MUSTARD CAPACITOR

    18,25 € tax incl.
    (recommended public price)

    You must be logged

    WK-TC

    In Stock

    TELE® WIRING KIT - SWITCHCRAFT JACK - CTS POTS - CRL SWITCH - MALLORY MUSTARD CAPACITOR

    40,78 € tax incl.
    (recommended public price)

    You must be logged

    0991712921

    In Stock

    Nitrocellulose lacquer is a vintage-accurate finish that wears gradually over time, creating a pleasantly worn-in appearance with use. Our Road Worn® Nitro finish is hand-distressed to faithfully recreate the look and feel of a well-loved vintage instrument. This genuine Fender Precision Bass neck is crafted at our Ensenada, Mexico manufacturing facility....

    391,67 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSCR50-W

    In Stock

    BOBBIN FOR HUMBUCKER SCREW SIDE 50mm STRING SPACING WHITE -String spacing : 50mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    ET001GC

    In Stock

    EVERTUNE BRIDGE G MODEL 6 STRINGS CHROME For Gibson-style guitars. Ambidextrous. Every new EverTune bridge comes with a service pack. This includes an EverTune hex key (matched to the faceplate color), an extra set of action screws and a printed Owners Manual. If the installed set of action screws is 8mm then the service pack will have 10mm screws; if the...

    299,17 € tax incl.
    (recommended public price)

    You must be logged

    SP-PMF-NN

    Special order only

    Reprenant l'architecture originale des premiers mini-humbuckers, ils conservent leur caractère particulier et original des meilleurs mini-humbuckers ainsi que leur attaque si spécifique. Du gros rock, du hard rock, du blues ... Ils ont le grain, ils ne leur manque que les mains, parcequ'attention, ils retranscrivent toutes les nuances de jeu et du coup ne...

    104,17 € tax incl.
    (recommended public price)

    You must be logged

    FS57110-S

    In Stock

    JESCAR® FRETWIRE STAINLESS STEEL 2.79 X 1.45mm (25 PCS SET / 10" RADIUS) The classic Jumbo fret wire as used by PRS and most of the modern metal guitar manufacturers. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    22,92 € tax incl.
    (recommended public price)

    You must be logged

    VBOBSLU49-C

    In Stock

    BOBBIN FOR HUMBUCKER SLUG SIDE 49.2mm STRING SPACING CREAM -String spacing : 49.2mm -Total height : 9.20mm -Winding height : 6.30mm

    1,33 € tax incl.
    (recommended public price)

    You must be logged

    FS43080-S

    In Stock

    JESCAR® FRETWIRE STAINLESS STEEL 2.03 X 1.09mm (25 PCS SET / 10" RADIUS) The same crown dimension as 43080 but with a wider and longer tang. Perfect for newer Taylor and Gibson acoustics. Sets are packed into bags containing 25 straight-cut 2.75? / 7 cm pieces pre-radiused to 10?.

    20,75 € tax incl.
    (recommended public price)

    You must be logged

    FL47104-EVO

    In Stock

    JESCAR® FRETWIRE EVO GOLD 2.64 X 1.19mm (2' / 60cm STRAIGHT LENGTH) For over 20 years one of the most popular frets for guitars and basses. As used by PRS, Ernie Ball, and many others.

    8,00 € tax incl.
    (recommended public price)

    You must be logged

    TOP-QM3

    In Stock

    TOP AAAA QUILTED MAPLE 530X 190X 30X 2

    224,17 € tax incl.
    (recommended public price)

    You must be logged

    WK-TC-4W

    In Stock

    TELE® 4 WAYS WIRING KIT - SWITCHCRAFT JACK - CTS POTS - OAK SWITCH - MALLORY MUSTARD CAPACITOR

    40,51 € tax incl.
    (recommended public price)

    You must be logged

    DM-DP155B-BKCR

    In Stock

    DIMARZIO TONE ZONE DP155 BRIDGE ZEBRA OEM

    58,33 € tax incl.
    (recommended public price)

    You must be logged

    TT11-1M

    In Stock

    TRUSSROD TUBING DIAMETER 11mm (1m)

    1,58 € tax incl.
    (recommended public price)

    You must be logged