List of products by manufacturer Schatten

per page
Showing 1 - 12 of 29 items

ACWB

220 volt AC to 9 volt DC, 500 milliamp, center positive power supply.

10,80 € tax incl. (recommended public price)
New Deal
In resupplying

BAT-BAG

Battery bag with self adhesive velcro. Holds a standard 9 volt battery.

12,60 € tax incl. (recommended public price)

BJ-02-P

The BJ-02 series sensor is designed to work on any banjo. Five string, tenor, six string, open backs; all sound excellent with this pickup. Installation of the pickup system takes about ten minutes and everything that you need to complete the installation is included with the system.The pickup comes supplied with 3M VHB tape for mounting the sensor (as...

145,00 € tax incl. (recommended public price)
New Deal
Special order only

BM-1

The MVC jack assembly gives you a secure and reliable mounting for the output jack. On these thicker bodied instruments using a clamp-on jack assembly is just not practical thing. The MVC jack assembly, which nestles in right next to the tail piece, is only a half an inch high and mounts from the tailpiece (not the body). The BM-1 sensor is small and...

163,00 € tax incl. (recommended public price)

BSWD

The New Book Of Standard Wiring Diagrams is a compendium of Volumes I and II which were released in 1992 and 1997 respectively. This straight forward benchtop reference manual covers the wiring diagrams for all of the leading brands of electric guitars and basses. Drawn in an easy to follow style of pictorial diagrams, it also contains a lot of those hard...

65,00 € tax incl. (recommended public price)
New Deal
Special order only

ECWKB

Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life. Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some...

450,00 € tax incl. (recommended public price)

EP-01

The EP-01 is a small, light weight piezo sensor that is usually installed internally on an instrument's soundboard. The pickup comes with 18" of shielded cable. The piezo element is covered with an acoustic foam pad to help protect the element. Since the element is not 'potted' or heavily protected from damage, this sensor is normally installed either on...

26,00 € tax incl. (recommended public price)

EP-01J

The EP-01 is a small, light weight piezo sensor that is usually installed internally on an instrument's soundboard. The pickup comes with 18" of shielded cable.The EP-01J adds an endpin jack to the basic EP-01. It is not pre-wired to the jack. The piezo element is covered with an acoustic foam pad to help protect the element. Since the element is not...

39,00 € tax incl. (recommended public price)

FCW42

Used widely in vintage single coil pickups from the '50s and '60, and commonly used today in many custom-shop and reissue guitar pickups. The copper wire insulation is made from a Heavy Formvar enamel. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal...

115,00 € tax incl. (recommended public price)

HFN

The HFN is designed to give you a full, rich sound and will reproduce exactly what your guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN's are designed to be used with a preamp - for best results, the HFN passive may be paired up with one of our outboard...

150,00 € tax incl. (recommended public price)

HFN-C

The HFN-C is designed to give you a full, rich sound and will reproduce exactly what your classical guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN-C's are designed to be used with a preamp - for best results, the HFN-C passive may be paired up with one...

150,00 € tax incl. (recommended public price)
New Deal
In resupplying

HFN-S2

The HFN-S2 is designed to give you a full, rich sound and will reproduce exactly what your gypsy jazz guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN-S2's are designed to be used with a preamp - for best results, the HFN-S2 passive may be paired up with...

159,00 € tax incl. (recommended public price)
Showing 1 - 12 of 29 items