List of products by manufacturer Schatten
SCHATTEN® THUMBWHEEL POTS 2 X VOL OR 1 VOL + 1 TONE 500K (CUTTABLE)
T-2-500K
T-2 thumbwheel controls are small, circuit board mounted units that can be used as a volume and tone control or as two volume controls. T-2's are also designed to easily be split into two single thumbwheel units should you want to use single thumbwheels for any purpose. T-2's use 500k thumbwheels and come complete with 24 inches of 5 conductor shielded...
SCHATTEN® TRICONE RESONATOR GUITAR PICKUP
TC
The TC installs quickly with the sensing element attaching to the side of the T bridge with 3M VHB tape adhesive. - Excellent feedback resistance - Light weight. Does not alter the acoustic sound of the instrument. - No modifications necessary - The Std and Pro model passive pickup systems may be mounted without drilling any holes. - Superb Sound This...
SCHATTEN® SELMER INSTALLATION TOOL KIT
TOOL KIT
The kit consists of two parts. The first is an articulated tool for placing and installing the HFN-S2 sensor inside and onto the bracing in a petite bouche Selmer. The second is a tool for pulling the endpin jack or endpin jack preamp into place from the sound hole to the end block.
SCHATTEN® VINTAGE COIL WIRE 42 GAUGE (ENV 0.0063mm - 250GR - 7500 METRES)
VCW42
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each half pound spool contains approximately 25,000 feet...
SCHATTEN® VINTAGE COIL WIRE 43 GAUGE (ENV 0.0056mm - 250GR - 9900 METRES)
VCW43
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
