Search
Catalog
Loading...
SUPPORT PICKGUARD BRACKET (JAZZ) NICKEL
SUPPORT PICKGUARD BRACKET (JAZZ) GOLD
PICKGUARD FOR ARCHTOP GUITAR ACRYLIC MATERIAL LARGE SIZE WITH 5 PLYS BINDINGS BLACK -Dimensions : 202mm long x 97mm large -Nickel bracket included
PICKGUARD FOR ARCHTOP GUITAR ACRYLIC MATERIAL SMALL SIZE WITH 5 PLYS BINDINGS BLACK -Dimensions : 175mm long x 99mm large -Nickel bracket included
PICKGUARD FOR ARCHTOP GUITAR ACRYLIC MATERIAL LARGE SIZE WITH 5 PLYS BINDINGS TORTOISE -Dimensions : 202mm long x 97mm large -Nickel bracket included
PICKGUARD FOR ARCHTOP GUITAR ACRYLIC MATERIAL SMALL SIZE WITH 5 PLYS BINDINGS TORTOISE -Dimensions : 175mm long x 99mm large -Nickel bracket included
This replacement pickguard is made to fit the Gibson® ES-125 T® produced from 1956-1969 with a single dogear P90.This pickguard does not fit reissue models, or models produced by Epiphone®. While many manufacturers may make a similar model instrument, this does not mean each pickguard of this type is interchangeable.
This replacement pickguard is made to fit the Gibson® ES-125 TCD® produced in the 1960's. This pickguard does not fit reissue models, or models produced by Epiphone®. While many manufacturers may make a similar model instrument, this does not mean each pickguard of this type is interchangeable.
This replacement pickguard is made to fit the USA made Gibson® Explorer® produced from 2010-2018. This pickguard does not fit reissue, Korina, Faded, Signature, or models produced by Epiphone®. While many manufacturers may make a similar model instrument, this does not mean each pickguard of this type is interchangeable.
This pickguard mounting bracket is used on archtop guitars where the pickguard bracket is mounted with one screw in the side of the guitar and the pickguard itself is screwed to a metal threaded mounting block in place of a block glued to the pickguard.
This pickguard mounting bracket is used on archtop guitars where the pickguard bracket is mounted with one screw in the side of the guitar and the pickguard itself is screwed to a metal threaded mounting block in place of a block glued to the pickguard.