Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® Resonators
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
G&W COLLET CHUCK ADAPTER FOR ROUTER 8mm TO 6.35mm
6,10 €tax incl.
(recommended public price)
This product is on resupplying
GW-CH1-8-6.35
8mm outside diameter, 6.35mm inside, and 25mm on height.
BIT FOR TEMPLATES 1/2 INCH DEPTH
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
BIT FOR BINDINGS 1/16 INCH CHANNEL CUT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55in (14mm ) Bit shaft diameter = 1/4 in. Length of bit excluding shaft = 1.10 in. (28mm)
BIT FOR CONTROL CAVITY LEDGE
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on. Bit shaft diameter = 1/4 in.
BIT FOR TEMPLATES 3/4 INCH DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
BIT FOR TEMPLATES 3/8 INCH DEPTH
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
30 other products in the same category:
G&W MACHINIST VISE WITH BRASS JAWS FOR NUT...
GW-MV-BJAWS
G&W STAINLESS STEEL DUAL FRET SCALE...
GW-SSDFST24.6-24.7
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W10
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W12
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W14
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W16
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W7.25
G&W WOOD RADIUS SANDING BEAM FOR FRETBOARD...
GW-TRALU200-W9.5
G&W FLAT MACHINED DUAL NOTCHED GUITAR NECK...
GW-FMTDSN01
