Search
Categories
Viewed products
·Effective Length : 22mm
·Overall Length : 49mm
20 other products in the same category:
WD MUSIC® BIT FOR TEMPLATES 1/2 inch DEPTH
1/2 BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is the standard bit. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 1/2" per pass. Bit shaft diameter = 1/4 in.
WD MUSIC® BIT FOR BINDINGS 1/16 inch CHANNEL CUT
BINDING BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. This is a high quality carbide bit designed to cut a 1/16 in. binding channel on the tops and backs of guitars. Bit diameter = 0.55in (14mm ) Bit shaft diameter = 1/4 in. Length of bit excluding shaft = 1.10 in. (28mm)
WD MUSIC® BIT FOR CONTROL CAVITY LEDGE
CAVITY BIT
These high quality carbide bits are designed for luthier applications. Available for binding, template cuts, and control cavities. After cutting a control cavity in the back of a guitar, this bit will cut a perfect symmetrical ledge to mount your backplate on. Bit shaft diameter = 1/4 in.
GÖLDO® TRIPLE EDGE COUNTERSINK 10mm
WS10S
TRIPLE EDGE COUNTERSINK (10mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 6.3mm
WS63S
TRIPLE EDGE COUNTERSINK (6,3mm)
GÖLDO® TRIPLE EDGE COUNTERSINK 8.3mm
WS83S
TRIPLE EDGE COUNTERSINK (8,3mm)
WD MUSIC® BIT FOR TEMPLATES 3/4 inch DEPTH
BIT-3/8-OD
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/4" per pass. Bit shaft diameter = 1/4 in.
HOSCO® 2 STEP DRILL BIT 7.8mm / 9.9mm HSS FOR MODERN MACHINE HEADS
TL-DB2-7899
HOSCO 2 STEP DRILL BIT FOR DIE CAST TUNERS (7.8mm/9.9mm)
WD MUSIC® BIT FOR TEMPLATES 3/8 inch DEPTH
BIT-3/8
This bit is designed for the deeper cuts and features a smaller radius for tighter corners. It is custom made for us of high quality carbide with a high speed bearing and a locking collar. It will cut a maximum depth of 3/8" per pass.
G&W COLLET CHUCK ADAPTER FOR ROUTER 8mm TO 6.35mm
GW-CH1-8-6.35
