Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® Resonators
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Catalog
Duesenberg® There are 154 products.
Subcategories
DUESENBERG® BASS SINGLE MACHINE HEAD Z-TUNER TREBLE SIDE GOLD (1pce)
MDBRG
The strings are just put all through the tuner. Cut off the end of the string on the backside of the headstock. Then press back 1mm by the tip of your thumb to avoid dangerous sharp ends. Then turn the button and the string is in tune. individual tuner (1 left) 90° attachment latch for 14mm pegholes incl. bushings and screws
ADAPTATEUR DUESENBERG TDBSN SUR LES PAUL® SANS MODIFICATION
MPTM5
ADAPTATEUR DUESENBERG TDBSN SUR LESPAUL SANS MODIFICATION
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS HALF OPEN 1:18 GOLD
MZDDG
3+3, gold ArtDeco version of the open Duesenberg tuners MZDVN. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS HALF OPEN 1:18 NICKEL
MZDDN
3+3, nickel ArtDeco version of the open Duesenberg tuners MZDVN. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS OPEN 1:18 GOLD
MZDVG
3+3, gold The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS OPEN 1:18 NICKEL
MZDVN
3+3, nickel The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS MICRO 1:18 NICKEL
MZKS33N
The Duesenberg Z-Tuners Micro are used on our 12-string models such as the DoubleCat, Caribou and Mando guitar. Instead of regular pegs, these are fitted with knurled slim shafts which allow for a very space-saving installation on 12-string headstocks. The exact position and orientation on the headstock is fixed through two little pegs on the backside of...
