Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® Resonators
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
-
DUESENBERG® MACHINE...
3+3, nickel ArtDeco version of the...
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS HALF OPEN 1:18 NICKEL
119,00 €tax incl.
(recommended public price)
MZDDN
·For 3+3 headstocks
·Gear ratio 1:18
·For 10mm pegholes
·Incl. bushings and screws
ArtDeco version of the open Duesenberg Z-Tuners MZDVG . The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain.
6 other products in the same category:
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZDVN
3+3, nickel The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZDVG
3+3, gold The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZD3DG
*DUESENBERG Z-TUNERS 3X3 (USED ON TV) 18:1 GOLD
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZD3DN
DUESENBERG Z-TUNERS 3X3 (USED ON TV) 18:1 NICKEL
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZDDG
3+3, gold ArtDeco version of the open Duesenberg tuners MZDVN. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore.
DUESENBERG® MACHINE HEADS 3+3 Z-TUNERS...
MZKS33N
The Duesenberg Z-Tuners Micro are used on our 12-string models such as the DoubleCat, Caribou and Mando guitar. Instead of regular pegs, these are fitted with knurled slim shafts which allow for a very space-saving installation on 12-string headstocks. The exact position and orientation on the headstock is fixed through two little pegs on the backside of...
