Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Guitares à Résonateur Dan Armstrong®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
GHOST® CARTE PRÉAMPLI...
The PD-0240-00 is a Acousti-Phonic...
GHOST® CARTE PRÉAMPLI ACOUSTIPHONIC
63,00 €TTC
(prix public conseillé)
En réapprovisionnement
PD-0240-00
The PD-0240-00 is a Acousti-Phonic preamp board EQ'd for Guitar. Replaces the board included in the PE-0240-00, PK-0240-00, and PK-0680-00.
GHOST® SWITCHCRAFT® 13B JACK STÉRÉO A...
The PD-0103-01 is the stereo Switched Output Jack (4 contacts) used in the Acousti-Phonic Preamp kits. Replaces your 1/4" output jack and provides automatic Stereo/Mono mode switching and power on/off functions.
GHOST® MID/DARK SWITCH
The PE-0106-00 is a Volume harness for the Acousti-Phonic with a 2-position toggle switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz). Lets you connect a 250K or 500K pot (convert tone pot or provide your own pot) to the Acousti-Phonic. Note: this harness also...
GHOST® QUICK SWITCH POUR MAG/LES 2/PIEZO
The PE-0111-00 is a 3-position switch that lets you instantly switch between mag/both/acoustic when plugged into the Acousti-Phonic.When plugged into the Hexpander MIDI Interface, this same component selects between MIDI/both/guitar, where guitar is whatever is on the Acousti-Phonic's QuickSwitch.
GHOST® POTENTIOMÈTRE VOLUME PUSH/PULL AVEC...
The PE-0206-00 is the volume pot for the Acousti-Phonic with an incorporated push/pull switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz).
GHOST® CÂBLE POUR POTENTIOMÈTRE DE VOLUME
The PE-5002-00 is a cable assembly to solder to a regular 250K or 500K volume pot so that it can plug into the Acousti-Phonic and control the acoustic volume. Also includes wires to connect your mags to the Acoust-Phonic.
GHOST® CÂBLE POUR JACK A COUPURE VERS...
The PE-5003-00 is the cable assembly to solder to the Stereo Switched Output Jack and plug into the Acousti-Phonic.
GHOST® BORNIER DE CONNECTIONS POUR PIEZO
Summing Board connects all the ghost pickups together for into the Acousti-Phonic preamp. An additional summing board can be used to increase the number of inputs (or strings) that can be used with the Acousti-Phonic preamp. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.
GHOST® CÂBLE POUR BORNIER VERS ACOUSTIPHONIC
The PE-5021-00 is used to connect the Summing Board to the Acousti-Phonic. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.
30 autres produits dans la même catégorie
GHOST® RESOMAX® CHEVALET WRAPAROUND NVW US...
PN-8593-CO
The PN-8593-CO is a ghost loaded ResoMax NW2 adjustable wraparound bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® RESOMAX® CHEVALET WRAPAROUND NVW US...
PN-8593-BN
The PN-8593-BN is a ghost loaded ResoMax NW2 adjustable wraparound bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® PONTETS PIEZO STYLE WILKINSON®...
PN-8200-00
The PN-8200-00 is set of ghost loaded pickups for a Wilkinson VS tremolo bridge. They will work with any of our ghost preamp kits.
GHOST® CÂBLE POUR JACK A COUPURE VERS...
PE-5003-00
The PE-5003-00 is the cable assembly to solder to the Stereo Switched Output Jack and plug into the Acousti-Phonic.
GHOST® RESOMAX® CHEVALET TUNE-O-MATIC NV...
PN-8863-NO
The PN-8843-NO is a ghost loaded 6mm ResoMax NV2 tune-o-matic bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® QUICK SWITCH POUR MAG/LES 2/PIEZO
PE-0111-00
The PE-0111-00 is a 3-position switch that lets you instantly switch between mag/both/acoustic when plugged into the Acousti-Phonic.When plugged into the Hexpander MIDI Interface, this same component selects between MIDI/both/guitar, where guitar is whatever is on the Acousti-Phonic's QuickSwitch.
GHOST® MID/DARK SWITCH
PE-0106-00
The PE-0106-00 is a Volume harness for the Acousti-Phonic with a 2-position toggle switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz). Lets you connect a 250K or 500K pot (convert tone pot or provide your own pot) to the Acousti-Phonic. Note: this harness also...
GHOST® CÂBLE STEREO Y - STEREO VERS 2 MONO
PD-0810-00
To use the Acousti-Phonic's Stereo Mode -- to send the mags to your guitar amp and the acoustic piezo saddles to an acoustic amp or direct to the P.A. system -- you need to split the signal using a Y-cable. We are please to offer this stereo-to-two-mono Y-cable, which is the right kind for use with the Acousti-Phonic.
GHOST® NAPPE CÂBLAGE INTERFACE
PD-0512-00
The PD-0512-00 connects the Hexpander MIDI Interface board to the 13-pin Jack. 12 inches long. This harness has 16 holes, and on each end one hole is blocked to "key" the connector so it can't be plugged into the Hexpander or 13-pin jack the wrong way.
GHOST® CARTE PRÉAMPLI EXPANDER
PD-0440-00
The PD-0440-00 is a replacement Hexpander MIDI Interface board. Replaces the board included in the PE-0440-00, PK-0440-00, PK-0680-00, and PK-0780-00.
GHOST® CARTE PRÉAMPLI BASS ACOUSTIPHONIC
PD-0340-00
The PD-0340-00 is a replacement Acousti-Phonic preamp board EQ'd for bass. Replaces the board included in the PE-0340-00, PK-0340-00, and PK-0780-00.
GHOST® CÂBLE MAG VERS SORTIE 7 BROCHES
PE-0182-GO
The PE-0182-GO is used If you are installing the Hexpander without the Acousti-Phonic and allows you to have signal transmission (magnetic pickups and/or raw piezo signal) run down pin 7 of your 13 pin cable.
GHOST® PONTET PIEZO GUITARE ACOUSTIQUE (1...
BN-9286-RU
The BN-9286-RU is one piece (bulk pack) ghost loaded pickup for acoustic steel stringed instruments.
GHOST® PONTET PIEZO GUITARE CLASSIQUE (1 PCE)
BN-9277-RU
The BN-9277-RU is one piece (bulk pack) ghost loaded pickup for acoustic nylon stringed instruments.
GHOST® PONTET PIEZO BASSE CHEVALET ABM® (1...
BN-8360-00
The BN-8360-00 is one piece (bulk pack) ghost loaded pickup for an ABM style bass bridges.
GHOST® MOMENTARY SWITCH HAUT/BAS SÉLECTION...
PE-0180-00
The PE-0180-00 is an optional control for the Hexpander MIDI Interface. This switch allows you to scroll up and down through your MIDI converter's sounds. It's the same as what some converters call an S1/S2 switch.
GHOST® POTENTIOMÈTRE VOLUME HEXPANDER
PE-0181-00
The PE-0181-00 is an optional control for the Hexpander MIDI Interface, this volume pot allows you to adjust your MIDI converter's volume without taking your hands off your guitar or bass.
GHOST® SORTIE 13 BROCHES AVEC TRAKTION SWITCH
PE-0540-00
The PE-0540-00 is a 13-pin Jack for ghost Hexpander preamp, with Traktion switch to select tracking curve for Roland or Axon and other converters. It includes mounting plate and all the screws, bolts, and washers.
GHOST® ACOUSTIPHONIC GUITARE BASIC PREAMP KIT
PE-0240-00
The PE-0240-00 is the basic Ghost Acousti-Phonic preamp kit. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar.
GHOST® ACOUSTIPHONIC BASSE BASIC PREAMP KIT
PE-0340-00
The PE-0340-00 is the basic Ghost Acousti-Phonic preamp kit. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric bass.
GHOST® KIT VOLUME PASSIF POUR PIEZO
PE-0400-00
The PE-0400-00 lets you connect ghost saddle pickups directly to the supplied stereo 1/4"" output jack. One side for your magnetic pickups and the other side for the ghost pickups. No batteries required, although we recommend an outside piezo preamp for ultimate acoustic tone.
GHOST® PRÉAMPLI HEXPANDER PLUS AVEC...
PE-0440-00
The PE-0440-00 is our basic Hexpander Preamp Kit. It has all the components (excluding pickups) that you need to add MIDI capabilities to your guitar or bass. *You will also need a set of ghost loaded pickups to complete the setup. We offer pickups sets for guitar and bass. We have individual sets of ghost loaded saddles as well as complete ghost loaded...
GHOST® CÂBLE POUR POTENTIOMÈTRE DE VOLUME
PE-5002-00
The PE-5002-00 is a cable assembly to solder to a regular 250K or 500K volume pot so that it can plug into the Acousti-Phonic and control the acoustic volume. Also includes wires to connect your mags to the Acoust-Phonic.
GHOST® POTENTIOMÈTRE VOLUME PUSH/PULL AVEC...
PE-0206-00
The PE-0206-00 is the volume pot for the Acousti-Phonic with an incorporated push/pull switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz).
HIPSHOT® PONTET CHEVALET STYLE A POUR...
BN-5A00-B
Hipshot A style bass bridge saddle black for piezo mounting (1 piece). To pair with BN-8370-00.
HIPSHOT® PONTET CHEVALET STYLE A POUR...
BN-5A00-C
Hipshot A style bass bridge saddle chrome for piezo mounting (1 piece). To pair with BN-8370-00.
GHOST® PONTET PIEZO BASSE CHEVALET...
BN-8370-00
The BN-8370-00 is one piece (bulk pack) ghost loaded pickup for a Hipshot A-style bass bridge. Can be paired with BN-5A00-C or BN-5A00-B saddles.
GHOST® CÂBLE POUR BORNIER VERS ACOUSTIPHONIC
PE-5021-00
The PE-5021-00 is used to connect the Summing Board to the Acousti-Phonic. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.
GHOST® KIT MIDI GUITARE CLASSIQUE (TOUT...
PK-7077-00
The PK-7077-00 is the Acoustic MIDI system for nylon string guitars. This allows you to add our Hexpander and Acousti-Phonic to any nylon string guitar. It gives you access to the fastest tracking MIDI system along as well as an extremely realistic acoustic tone to your acoustic guitar
GHOST® VIBRATO FLOYD ROSE® LICENSED AVEC...
PN-0080-BO
The PN-0080-B0 is a drop-in, ghost loaded replacement for a Floyd Rose Original and Licensed bridge in black. The custom ghost pickup inserts are encased in our own String Saver™ material. Can be used with any ghost preamp kit or on its own.
