Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Guitares à Résonateur Dan Armstrong®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Catalogue
Pièces Mécaniques Il y a 39 produits.
GOTOH® OEILLETS POUR SD91 MÉCANIQUES VINTAGE 6.5-8.8mm NICKEL (6pcs)
MB00N
GOTOH® BUSHINGS FOR SD91 VINTAGE MACHINE HEADS NICKEL (6pcs) -Inner Diameter : 6.5mm -Outer Diameter : 8.8mm
GOLDO® OEILLETS HEXAGONAL 6.4 - 8.8mm NICKEL (6pcs)
MB02N
Knurled press-fit bushings for vintage tuners. Press-Fit like regular vintage bushings but with the appearance of a hex nut. Diameter at the bottom 8.8mm, at the top 10mm Inner diameter 6.4mm Height 8mm Set of 6.
GOLDO® OEILLETS ADAPTATEURS 8.5- 10mm NICKEL (6pcs)
MB05C
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
GOLDO® OEILLETS ADAPTATEURS 8.5- 10mm DORÉ (6pcs)
MB05G
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
GOTOH® OEILLETS POUR SD91 MÉCANIQUES VINTAGE 6.5-8.8mm DORÉ (6pcs)
MB0GD
GOTOH® BUSHINGS FOR SD91 VINTAGE MACHINE HEADS GOLD (6pcs) -Inner Diameter : 6.5mm -Outer Diameter : 8.8mm
GOLDO® OEILLETS EYELET 6.4/7.2mm NICKEL (6pcs)
MB0VN
Plain press-in bushings for vintage tuners. Diameter at the bottom 7.2mm (for 7mm holes) and 10.5mm at the collar. Inner diameter 6.4mm. Height 8mm. Set of 6.
GOLDO® OEILLETS CENTRAGE VINTAGE TUNERS DIA 6.4/10.1mm LONG 5 NICKEL (6pcs)
MBCFN
Allow centering a tuner shaft on the backside of the headstock inside a 10mm peghole. Why you ask? If you want to install vintage tuners on a headstock with 10mm pegholes, the problem is how to center the 6.3mm shafts of the new tuners in the holes. One solution is to fill the holes and then drill new ones with the proper diameter. Or you simply use these...
