FRATERMUSIC® EXTRACTEUR POUR CHEVALET ET INSERT

SUMMIT® MULTITASK PRESS-DEVICE FOR LUTHIERS

SUM8009

SUMMIT MULTITASK PRESS-DEVICE FOR LUTHIERS SUMMIT presse multi-tâches

SUMMIT® ATTACHMENTS SET FOR BUSHING GUITAR...

SUM80091

SUMMIT ATTACHMENTS SET FOR BUSHING GUITAR 6mm (works with item: 8009) SUMMIT set d'outils pour installer et désinstaller les bushings de 6 mm. se fixe sur la presse SUMMIT (référence : 8009)

STRING SWING JACK INSTALLATION TOOL FOR...

CC31

A must-have for guitar luthiers! This tool makes a breeze of the difficult task of installing instrument pickup jacks! The tool can be fed up through the jack installation hole & out through the sound hole. The jack can then be secured to the tool & pulled back through; to bring the jack into its place.

STRING SWING® JACK & FERRULE TOOL

CC18

A must-have for guitar luthiers! This tool offers a quick & easy way to tighten a loose jack plug on any surface-mounted input! Insert tool into jack & use allen wrench (as shown) to tighten the internal set screw. This gives the holding power needed to tighten the retainer nut, without having to go inside of the instrument! Designed to...

BOL MAGNÉTIQUE POUR VIS ET PIÈCES MÉTALLIQUES

MAGTRAY

Rangement magnétique pour petites pièces métalliques tels que des vis, des écrous, etc. Bol aimanté et caoutchouté pour une fixation sans dégâts à différents endroits.Fonctionnalités: - Ø du bol 10,5 cm - Force portante : environ 650g/cm².

HOSCO GROOBAR NUT SLOT ASSIST TOOL FOR...

H-GB4

HOSCO GROOBAR NUT SLOT ASSIST TOOL FOR GUITARS (SET OF 4)L : 1.07mm (0.042") L : 1.27mm (0.050") M : 1.42mm (0.056") H : 1.65mm (0.065")

MINI STAINLESS SQUARE / MINI EQUERRE

TL-RU-SQ75

MINI STAINLESS SQUARE / MINI EQUERRE

FRATERMUSIC® SEPARATEURS DE CORDES (2pcs)

STR-SPR

FRATER SEPARATEURS DE CORDES / STRINGS SEPARATORS (2 pcs)

AXMINSTER NON STICK DOWEL & BISCUIT GLUE...

107545

This is a pack of two reusable glue applicators. Ever had trouble getting glue into slots and dowel holes. These double-ended silicone rubber applicators solve the problem. The dowel tip allows you to work the glue into the dowel hole. The biscuit tip tapers to a thin flexible flat end allowing you to apply glue into a biscuit slot with ease. These...

SCHATTEN® ALIMENTATION / POWER SUPPLY 9 V...

ACWB

220 volt AC to 9 volt DC, 500 milliamp, center positive power supply.

SCHATTEN® MODEL B COIL WINDING MACHINE...

ECWKB

Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life. Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some...

SCHATTEN® TOOL FOR CHECKING POLARITY OF...

POLARITY TESTER

A simple tool for checking the polarity of pickup magnets.

5 LAMES POUR SCALPEL

SCALPEL-BLADES

5 Blades made of high-quality SK-5 steel

SCALPEL AVEC JEU DE 5 LAMES 142mm

SCALPEL

·Blades made of high-quality SK-5 steel ·Aluminium hand-grip with furrowed grip zone

PINCE À DENUDER

STRIPPER

SUPPORT DE SOUDAGE 3ÈME MAIN AVEC LOUPE

3RDHAND

SUPPORT DE SOUDAGE 3ÈME MAIN BRAS...

3RDHAND-DLX

HOSCO® TABLIER

H-AP1

SPATULE INOX POUR RÉPARATION GUITARE 108x16mm

PAL-096

SPATULE INOX POUR RÉPARATION GUITARE 67x10mm

PAL-105

SPATULE INOX POUR RÉPARATION GUITARE 100x33mm

PAL-106

SPATULE INOX POUR RÉPARATION GUITARE 70x49mm

PAL-8001

SPATULE INOX POUR RÉPARATION GUITARE 93x35mm

PAL-8003

SPATULE INOX POUR RÉPARATION GUITARE 220x39mm

PAL-8012

SPATULE INOX POUR RÉPARATION GUITARE 65x50mm

PAL-8018

LOT DE 7 SPATULES INOX POUR RÉPARATION...

PAL-SET7

G&W PINCES CROCODILE MÉTAL (2pcs)

GW-ALLI01

G&W OUTIL DE PONÇAGE DE SILLET

GW-EG-31

G&W ÉTAU AVEC MÂCHOIRES EN LAITON POUR...

GW-MV-BJAWS

G&W BLOC DE PONÇAGE CYLINDRIQUE PETIT

GW-TTSB01