Rechercher

Catégories

Déjà vus

American Standard Series Stratocaster®/Telecaster® Tuning Machines Gold (6)

Fender

FENDER® MÉCANIQUES AMERICAN PRO ÉTAGÉES 6x1 DORÉ

0990820200

95,00 €TTC
(prix public conseillé)

En stock 
						Stock : 2
						Minimum : 1

Si vous êtes un particulier, vous pouvez consulter notre catalogue, les prix affichés sont les prix publics TTC conseillés, mais vous devez vous rapprocher de votre luthier ou revendeur habituel pour passer commande.

Si vous êtes professionnel, vous pouvez demander l'ouverture de votre compte pro ci-dessous. Pour passer commande, vous devrez justifier d'une activité dans le domaine de la musique.



FENDER® AMERICAN PRO STAGGERED TUNING MACHINE SET GOLD

Set of six tuners designed to fit most modern-style Fender® electric guitars with dual-pin mounting configuration. Tall post tuners are used for low E and A strings and shorter post tuners used for D, G, B and high E strings. Staggered tuners increase the break angle over the nut and improve tuning stability. Available in chrome and gold plated. Mounting hardware included.

·Lot de six mécaniques (2 à tiges longues et 4 à tiges courtes)
·Ratio de 14:1
·Fixations à double axe de guidage
·Bagues et rondelles fournies
·Utilisées sur les guitares American Professional, American Standard et American Series guitars

    30 autres produits dans la même catégorie

    En stock

    M6KAGED

    GOTOH® SD91 MACHINE HEADS 6X1 RATIO 1:15 NICKEL AGED -Gear Ratio : 1:15 -Bushing Diameter 8.8mm -Button : 05M

    53,00 € (prix public conseillé)
    En stock

    M6KLH

    GOTOH® SD91 MACHINE HEADS FOR LEFT HAND 6X1 RATIO 1:15 NICKEL -Gear Ratio : 1:15 -Bushing Diameter 8.8mm -Button : 05M

    47,00 € (prix public conseillé)
    En stock

    MBKL6LG

    The original from Kluson! Highest possible tuning stability! The "Kluson Backlock System" allows you to run the string through the tuner shaft and fix it by tightening the knurled lock screw at the back of the tuner. A pin inside the shaft locks the string. The ingenious detail: when loosening the lock screw, it eventually ends up in a free spin so that...

    92,00 € (prix public conseillé)
    En stock

    MBKL6LN

    The original from Kluson! Highest possible tuning stability! The "Kluson Backlock System" allows you to run the string through the tuner shaft and fix it by tightening the knurled lock screw at the back of the tuner. A pin inside the shaft locks the string. The ingenious detail: when loosening the lock screw, it eventually ends up in a free spin so that...

    76,00 € (prix public conseillé)
    En stock

    MC6LG

    The original from Kluson! As found on almost all vintage F-Type instruments and many more. In the early 60s, Kluson replaced the original "Single Line" imprint on all tuner housings with a "Double Line" imprint. Today, these are generally known as "Kluson Double Line" tuners. This tuner still has the original 15:1 gear ratio and is perfectly suitable for...

    89,00 € (prix public conseillé)
    En stock

    MC6LN

    The original from Kluson! As found on almost all vintage F-Type instruments and many more. In the early 60s, Kluson replaced the original "Single Line" imprint on all tuner housings with a "Double Line" imprint. Today, these are generally known as "Kluson Double Line" tuners. This tuner still has the original 15:1 gear ratio and is perfectly suitable for...

    51,00 € (prix public conseillé)
    En stock

    MK6LB

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-left headstocks Oval Buttons...

    39,50 € (prix public conseillé)
    En stock

    MK6LG

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-left headstocks Oval Buttons...

    60,00 € (prix public conseillé)
    En stock

    MK6LN

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-left headstocks Oval Buttons...

    35,50 € (prix public conseillé)
    En stock

    MK6RB

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-right (lefthand or reverse)...

    39,50 € (prix public conseillé)
    En stock

    MK6RG

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-right (lefthand or reverse)...

    60,00 € (prix public conseillé)
    En stock

    MK6RN

    The original Roundbacks from Kluson! "Roundbacks" are closed type, maintenance-free tuners for modern 10mm pegholes. The special 18:1 gear-ratio allows for extremely smooth and precise tuning. Lowest tolerances and best manufacturing technology make the Kluson "Roundbacks" the perfect standard for modern tuning machines. for 6-right (lefthand or reverse)...

    35,50 € (prix public conseillé)
    En stock

    10580520.15.60

    SCHALLER® ORIGINAL F-SERIES FOR 70'S 6X1 GOLD

    163,00 € (prix public conseillé)
    En stock

    6K1GL0C

    Give your guitar a killer look and improve your tuning stability at the same time with the Hipshot® Tuner Upgrade Kit for 6 Inline headstocks. Whether you want the extra security of Grip-Lock™ tuners or the buttoned-up aesthetic of classic machines, the UMP™ (Universal Mount Plate) allows you to upgrade with no drilling or special tools. Plus, reverting...

    131,00 € (prix public conseillé)
    En stock

    6K1VL0C

    Is your vintage tone machine drifting out of tune in the middle of the set? The Hipshot® Vintage Tuner Upgrade Kit is a risk-free step toward giving you consistent results from your beloved guitar. The Grip-Lock™ system securely clamps the string ends so that your pitch remains right where you set it. The 11/32” [8.5mm] tuning post shank and the UMP™...

    131,00 € (prix public conseillé)
    En stock

    M60LC-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS 6x1 RATIO 1:16 CHROME -Gear Ratio : 1:16 -Drill hole : 10mm

    72,50 € (prix public conseillé)
    En stock

    M60LB-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS 6x1 RATIO 1:16 BLACK -Gear Ratio : 1:16 -Drill hole : 10mm

    81,00 € (prix public conseillé)
    En stock

    M60LCK-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS 6x1 RATIO 1:16 COSMO BLACK -Gear Ratio : 1:16 -Drill hole : 10mm

    76,50 € (prix public conseillé)
    En réapprovisionnement

    M60LG-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS 6x1 RATIO 1:16 GOLD -Gear Ratio : 1:16 -Drill hole : 10mm

    92,00 € (prix public conseillé)
    En stock

    M6K1C-MG

    GOTOH® SD91 MG LOCKING MACHINE HEADS 6X1 RATIO 1:15 NICKEL -Gear Ratio : 1:15 -Bushing Diameter 8.8mm -Button : 05M

    65,00 € (prix public conseillé)
    En stock

    PRL-8721-BO

    A right handed set of Locking Ratio Tuned Machine Heads for electric guitar that use 6 in line tuners. Fits many Fender style guitars if you want to upgrade to a locking set of machine heads. A two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are...

    146,00 € (prix public conseillé)
    En stock

    PRL-8721-CO

    A right handed set of Locking Ratio Tuned Machine Heads for electric guitar that use 6 in line tuners. Fits many Fender style guitars if you want to upgrade to a locking set of machine heads. A two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are...

    146,00 € (prix public conseillé)
    En stock

    PRL-8721-GO

    A right handed set of Locking Ratio Tuned Machine Heads for electric guitar that use 6 in line tuners. Fits many Fender style guitars if you want to upgrade to a locking set of machine heads. A two pin casing that can be used as is, or with our Patented InvisoMatch Mounting Plates. 4 different sets of InvisoMatch mounting plates in brushed aluminum are...

    161,00 € (prix public conseillé)
    En stock

    M6K1C-MGT

    GOTOH® SD91 MG-T LOCKING MACHINE HEADS 6X1 RATIO 1:15 NICKEL -Gear Ratio : 1:15 -Bushing Diameter 8.8mm -Button : 05M

    88,00 € (prix public conseillé)
    En stock

    SGS510C-MGT

    GOTOH® SGS510 MG-T LOCKING MACHINE HEADS 6x1 SMALL BUTTONS RATIO 1:15 CHROME -Gear Ratio : 1:15 -Drill hole : 10mm -Button : S5

    125,00 € (prix public conseillé)
    En stock

    M60RCK-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS FOR LEFT HAND 6x1 RATIO 1:16 COSMO BLACK -Gear Ratio : 1:16 -Drill hole : 10mm

    76,50 € (prix public conseillé)
    En réapprovisionnement

    M60RC-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS FOR LEFT HAND 6x1 RATIO 1:16 CHROME -Gear Ratio : 1:16 -Drill hole : 10mm

    72,50 € (prix public conseillé)
    En stock

    M6K1G-MGT

    GOTOH® SD91 MG-T LOCKING MACHINE HEADS 6X1 RATIO 1:15 GOLD -Gear Ratio : 1:15 -Bushing Diameter 8.8mm -Button : 05M

    105,00 € (prix public conseillé)
    En stock

    10560271.01.36

    SCHALLER® STANDARD F-SERIES 6X1 CHROME LEFT HAND

    23,50 € (prix public conseillé)
    En réapprovisionnement

    M60RB-MGT

    GOTOH® SG381 MG-T LOCKING MACHINE HEADS FOR LEFT HAND 6x1 RATIO 1:16 BLACK -Gear Ratio : 1:16 -Drill hole : 10mm

    81,00 € (prix public conseillé)
    cover.jpg
    Qui sommes-nous ?

    Fred Guitar, premier distributeur spécialisé dans la pièce détachée pour guitares et basses, consommables et outils pour la construction et la réparation.

    All Parts
    Alpha
    Aparicio
    Apollo
    Artec
    Bartolini
    Big Bends
    Bigsby
    Bill Lawrence
    BlackSmith
    Boblen
    Bondhus
    Bourns
    Charvel
    Crel Pickups
    CTS
    D&A
    D'Andrea
    Delano
    Der Jung
    Divers
    DLV Finitions
    Dosakol
    Dreamsongs Pickups
    Duesenberg
    Dunlop
    Dupont
    Evertune
    EVH
    Faber
    Fender
    Floyd Rose
    Frater Music
    Galli Strings
    Gavitt
    Geronimo Mateos
    GHS Strings
    Gluboost
    Göldo
    Gotoh
    Graph Tech
    Gretsch
    Groove Tubes
    Grover
    Guitars & Woods
    Halon
    Hipshot
    Hosco
    Hoxey Guitars
    Indasa
    Jackson
    Jensen
    Jescar
    Jupiter
    K&K Sound
    KD By Axlabs
    Kent Armstrong
    Kerly Music
    Klemmsia
    Kluson
    Kovax
    Leo Quan Badass
    Liutopia
    Lock-It
    Marceau Guitars
    Marco Magi
    Menzerna
    Mi-Si
    Mirka
    Mitchell
    Musedo
    Nectite
    Newtone Strings
    Philippe Bosset
    Procell
    Pure Tone
    Q-parts
    Rakso
    Ratio
    Razor
    Riviera
    Rubio Monocoat
    Rubner
    San Lorenzo
    Sandberg
    Savarez
    Schaller
    Schatten
    Schertler
    Sintoms
    Skull Strings
    SP Custom
    Sperzel
    Stefy Line
    Stetsbar
    Summit
    Switchcraft
    Tan Bridges
    Thalia
    Thomas Flinn
    Threebond
    Titebond
    Tone Vise
    TonePros
    Tonewinder
    Tremol-No
    TV Jones
    Two Cherries
    Valresa
    Van Zandt Pickups
    Varta
    Vaudoo Audio
    Vega-Trem
    Vibramate
    WD Music
    Wilkinson