Rechercher
Catégories
- Mécaniques
- Chevalets & Cordiers
- Vibratos
- Micro - Preamps - Piezo
- Pièces Détachées Micros
- Électronique
- Accastillage
- Plaques de Protection et Plaques de Contrôle
- Corps & Manches
- Lutherie
- Outillage
- Peinture
- Cordes
- Accessoires
- Pièces pour Amplis & Étuis
- Pièces pour Instruments Bluegrass & Ukulélés
- Fender®
- Corps
- Boutons de commande
- Chevalets & vibratos
- Contrôles & Sélecteurs
- Mécaniques
- Divers
- Visserie
- Manches
- Plaques de protection & plaques arrières
- Capots micros & kits
- Micros & préamplis
- Plaques & capots métal
- Attaches-courroie & security locks
- Guide cordes & sillets
- Manettes de vibrato
- Accessoires
- Pièces d'ampli
- Duesenberg®
- Sandberg®
- Guitares à Résonateur Dan Armstrong®
- Haut-parleurs Jensen®
- Pièces Vieillies
- Pièces Gauchers
- Pièces pour 7 & 8 Cordes
Déjà vus
-
DUESENBERG® MÉCANIQUES...
*DUESENBERG Z-TUNERS 3X3 (USED ON TV)...
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS 1:18 DORÉ
119,00 €TTC
(prix public conseillé)
Sur commande uniquement
MZD3DG
·Pour têtes 3+ 3
·Ratio 1:18
·Fixation 90°
·Pour perces de 10mm
·Écrous et vis inclus
These machine heads can be found on most Duesenberg guitars, for example on the Starplayer TV, the Paloma or the Caribou.
Their reliability and solid construction have been proven on the big stages of the world. Now the housing has received a new, very elegant design. But the inner values have remained the same.
A trademark of the Duesenberg Z-Tuners is the unique, highly comfortable method of stringing. The string is inserted lengthwise through the hollow shaft and cut off at the back. Then the string is pulled back into the case so that the pointed end of the string no longer poses a risk of injury, and the string is wound up as usual. Only a few turns are required to keep the string securely in the machine head without slipping out.
6 autres produits dans la même catégorie
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS OUVERT...
MZDVN
3+3, nickel The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS OUVERT...
MZDVG
3+3, gold The first open Tuners from Duesenberg, as used on the new Duesenberg Gran Majesto and Gran Royale. Stylish vintage design, less weight. Otherwise the same properties as the other Z-Tuners. 10mm drill hole.
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS 1:18...
MZD3DN
DUESENBERG Z-TUNERS 3X3 (USED ON TV) 18:1 NICKEL
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS SEMI...
MZDDN
3+3, nickel ArtDeco version of the open Duesenberg tuners MZDVN. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore.
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS SEMI...
MZDDG
3+3, gold ArtDeco version of the open Duesenberg tuners MZDVN. The gear wheel has an elegant 3-step cover and the worm shaft is black anodized. As with all other Duesenberg Z-Tuners, the string is inserted into the shaft from above so that the sharp-edged end of the string cannot cause any damage or pain. 10mm bore.
DUESENBERG® MÉCANIQUES 3+3 Z-TUNERS MICRO...
MZKS33N
The Duesenberg Z-Tuners Micro are used on our 12-string models such as the DoubleCat, Caribou and Mando guitar. Instead of regular pegs, these are fitted with knurled slim shafts which allow for a very space-saving installation on 12-string headstocks. The exact position and orientation on the headstock is fixed through two little pegs on the backside of...
