Rechercher

Catégories

Déjà vus

Vintage-Style Thumb-Rest for Precision Bass® and Jazz Bass®

Fender

FENDER® VINTAGE-STYLE THUMB-REST FOR PRECISION BASS® AND JAZZ BASS®

10,00 €TTC
(prix public conseillé)

En stock

0992036000

Fender® vintage-style thumb rest comes with a template and mounting screws for proper placement.

Dimensions 0.70x6.15x11.45 IN
Poids 0.04 LB

    Produits de substitution

    REPOSE POUCE POUR BASSE PLASTIQUE NOIR

    AP621 REPOSE POUCE POUR BASSE PLASTIQUE NOIR

    En stock

    4,00 € TTC

    18 autres produits dans la même catégorie

    You must be logged
    En stock

    0048693049

    Make adjusting your intrument easy with the "T"-style truss rod adjustment Allen wrench for use with American guitars and basses.

    19,20 € (prix public conseillé)

    You must be logged
    En stock

    0991997000

    Fender® standard bass fret wire is pre-cut in 24-piece quantities pre-radiused to 9.5". Measurements: .046" tall, .103" wide. Cut for bass fingerboards. Dimensions 0.25x4.50x5.50 IN Poids 0.22 LB

    24,00 € (prix public conseillé)

    You must be logged
    En stock

    0991998000

    Fender® standard guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 9.5". Measurements: .046" tall, .103" wide. Cut for guitar fingerboards. Dimensions 0.85x6.00x5.00 IN Poids 0.10 LB

    19,20 € (prix public conseillé)

    You must be logged
    En stock

    0991999000

    Fender® jumbo guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 12". Measurements: .055" tall, .090" wide. Each piece is cut for guitar fingerboards. Dimensions 0.75x5.00x6.00 IN Poids 0.12 LB

    24,00 € (prix public conseillé)

    You must be logged
    En stock

    0992014000

    Fender® vintage-style guitar fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Cut for guitar fingerboards. Dimensions 0.75x6.00x5.00 IN Poids 0.20 LB

    18,00 € (prix public conseillé)

    You must be logged
    En stock

    0992015000

    Fender® vintage-style bass fret wire is pre-cut in 24-piece quantities pre-radiused to 7.25". Measurements: .045" tall, .083" wide. Each piece is approximately 2.375" long. Dimensions 0.25x4.50x5.50 IN Poids 0.20 LB

    23,40 € (prix public conseillé)

    You must be logged
    En stock

    0994916000

    Genuine Fender® pickup tubing is ideal for mounting new pickups just right and for replacing pickup springs or older tubing. Package includes 12 pieces of rubber tubing. Used with most Fender instruments with pickguard-mounting pickups. Dimensions 0.75x2.00x4.00 IN Poids 0.20 LB

    15,00 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    0994931000

    This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic,...

    11,40 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    0994943000

    To help keep the neck of your contemporary electric guitar or bass straight and true, Fender® offers genuine American series truss rod nuts that fit most modern instruments. Package includes one American Standard truss rod nut. 1/8" hex adjustment. Used on American Standard, American Deluxe and some Custom Shop guitars. Dimensions 0.75x2.00x4.00 IN Poids...

    11,88 € (prix public conseillé)

    You must be logged
    En stock

    0027932049

    Affordable genuine Fender® replacement parts for your guitar or bass. Package contains two walnut dowels used to plug the Bi-Flex™ truss rod cavity on the headstock of most American and American Deluxe Series guitars. Note: Plugs are drilled and grooved, but may require modification for proper fit

    19,20 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    0012156049

    FENDER® BOLT, MICRO TILT NECK ADJUST, 1/4-28X1-9/16, NICKEL (1)

    6,60 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    0031571049

    FENDER® NECK TILT ADJUST SCREW, AM SERIES, 1/4-20X3/8, HEX, NICKEL, EACH

    6,60 € (prix public conseillé)

    You must be logged
    En stock

    0019640049

    Cet authentique blindage fin en aluminium de Fender ne nécessite aucun câblage supplémentaire. Il s'installe sous la plaque de protection de votre Stratocaster et aide à éliminer les bruits indésirables pendant que vous jouez.

    11,88 € (prix public conseillé)

    You must be logged
    En stock

    0994945000

    To help keep '70s-style electric guitar and bass necks straight and true, Fender® offers genuine “Bullet”-style truss rod nuts. 1/8" hex adjusting head. Used in most '70s era and '70s reissue (US and Mexico) instruments with a headstock adjusting truss rod.

    14,28 € (prix public conseillé)

    You must be logged
    En stock

    0994944000

    Cet écrou cruciforme pour tige de réglage du manche de style vintage permet de garder le manche des guitares et des basses électriques bien droit. Il est compatible avec les instruments de séries American Vintage et Classic dont la tige de réglage du manche est accessible au niveau du talon.

    14,28 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    7715532049

    Véritable clé Allen/hexagonale Bondhus Fender de 3,2 mm (1/8”) pour les tiges de réglage des manches de la plupart des guitares American Series/Standard/Deluxe. 247,6 mm de longueur avec poignée en T.

    19,20 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    0018556049

    Ajustez la hauteur de vos micros en fonction de vos préférences, en utilisant ces bandes de mousse polyvalentes conçues spécialement pour les basses et les guitares de Fender.

    12,00 € (prix public conseillé)

    You must be logged
    En stock

    0014290020

    Fender Vintage Precision Bass Brass Pickup Grounding Plate. Solid brass. Fits into the body cavity under the pickup. Most installers solder a black wire to the plate and the back of the volume pot. Exactly the same part used on USA Vintage Series Precision Basses.

    16,80 € (prix public conseillé)
    cover.jpg
    Qui sommes-nous ?

    Fred Guitar, premier distributeur spécialisé dans la pièce détachée pour guitares et basses, consommables et outils pour la construction et la réparation.

    AllParts
    Alpha
    Apollo
    Artec
    Babicz
    Bartolini
    BIG BENDS
    Bigsby
    Bill Lawrence
    Boblen
    Bourns
    CHARVEL®
    Crel Pickups
    CTS
    D&A
    D'Andrea
    Dan Armstrong
    Delano
    Der Jung
    DiMarzio
    Divers
    DLV Finitions
    Dosakol
    Duesenberg
    Dunlop
    Dupont
    EMG
    Evertune
    EVH®
    Faber
    Fender
    Floyd Rose
    Frater Music
    Galli Strings
    Gavitt
    Geronimo Mateos
    GHS Strings
    Gluboost
    Göldo
    Gotoh
    Graph Tech
    GRETSCH®
    Grover
    Gruv Gear
    Guitars & Woods
    Halon
    Headway
    Hepcat
    Hipshot
    Hosco
    JACKSON®
    Jensen
    Jescar
    Jupiter
    K&K Sound
    Kent Armstrong
    Kerly Music
    Klemmsia
    Kluson
    Kovax
    Leo Quan Badass
    Liutopia
    Lock-It
    MARCEAU GUITARS
    MENZERNA
    Mi-Si
    Mirka
    Mitchell
    Musedo
    Nectite
    NEWTONE STRINGS
    Philippe Bosset
    PROCELL
    Pure Tone
    Q-parts
    Rakso
    Ratio
    Razor
    Riviera
    RUBIO MONOCOAT
    Rubner
    San Lorenzo
    Sandberg
    Savarez
    Schaller
    Schatten
    Schertler
    Sintoms
    Skull Strings
    SP Custom
    Sperzel
    Steph
    Stetsbar
    Summit
    Switchcraft
    Tan Bridges
    Thalia
    Thomas Flinn
    THREEBOND
    Titebond
    TKL
    TONE VISE
    TonePros
    TREMOL-NO
    TV Jones
    Two Cherries
    Valresa
    Van Zandt Pickups
    VARTA
    Vaudoo audio
    Vega-Trem
    Vibramate
    WD MUSIC
    Wilkinson