Search
Viewed products
Model B winding machine kits are...
Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life. Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some soldering work and installation of parts on the machine. Average assembly time is between forty five minutes and one hour. The only things that we don't supply are the simple hand tools and the solder and soldering iron. Features: Speed control, resettable electronic counter, rotation direction via selector switch, cross Feed limit assembly, outside drive belt for easy replacement, heavy duty ABS enclosure. Specifications: - Maximum speed (no load): 1250 rpm - Average winding speed: up to 900 rpm - Motor: 9v dc brushed motor, fractional hp - Power supply furnished with machine: 9 volt 500 milliamp, tip positive.
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each half pound spool contains approximately 25,000 feet...
This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
220 volt AC to 9 volt DC, 500 milliamp, center positive power supply.
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each...
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.
This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 44 gauge - Finer still than 43 gauge, this wire has a nominal diameter of 0.0020". Each half pound spool contains approximately 41,600 feet of wire.
Used widely in vintage single coil pickups from the '50s and '60, and commonly used today in many custom-shop and reissue guitar pickups. The copper wire insulation is made from a Heavy Formvar enamel. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal...
SUMMIT MULTITASK PRESS-DEVICE FOR LUTHIERS SUMMIT presse multi-tâches
SUMMIT ATTACHMENTS SET FOR BUSHING GUITAR 6mm (works with item: 8009) SUMMIT set d'outils pour installer et désinstaller les bushings de 6 mm. se fixe sur la presse SUMMIT (référence : 8009)
A must-have for guitar luthiers! This tool makes a breeze of the difficult task of installing instrument pickup jacks! The tool can be fed up through the jack installation hole & out through the sound hole. The jack can then be secured to the tool & pulled back through; to bring the jack into its place.
A must-have for guitar luthiers! This tool offers a quick & easy way to tighten a loose jack plug on any surface-mounted input! Insert tool into jack & use allen wrench (as shown) to tighten the internal set screw. This gives the holding power needed to tighten the retainer nut, without having to go inside of the instrument! Designed to...
FRATER BRIDGE LIFTER / POST EXTRACTOR
Rangement magnétique pour petites pièces métalliques tels que des vis, des écrous, etc. Bol aimanté et caoutchouté pour une fixation sans dégâts à différents endroits. Fonctionnalités: - Ø du bol 10,5 cm - Force portante : environ 650g/cm².
HOSCO GROOBAR NUT SLOT ASSIST TOOL FOR GUITARS (SET OF 4) L : 1.07mm (0.042") L : 1.27mm (0.050") M : 1.42mm (0.056") H : 1.65mm (0.065")
MINI STAINLESS SQUARE / MINI EQUERRE
FRATER SEPARATEURS DE CORDES / STRINGS SEPARATORS (2 pcs)
This is a pack of two reusable glue applicators. Ever had trouble getting glue into slots and dowel holes. These double-ended silicone rubber applicators solve the problem. The dowel tip allows you to work the glue into the dowel hole. The biscuit tip tapers to a thin flexible flat end allowing you to apply glue into a biscuit slot with ease. These...
220 volt AC to 9 volt DC, 500 milliamp, center positive power supply.
A simple tool for checking the polarity of pickup magnets.
5 Blades made of high-quality SK-5 steel
·Blades made of high-quality SK-5 steel ·Aluminium hand-grip with furrowed grip zone