G&W NUT AND SADDLE SANDER
The Nut and Saddle Sander holds the nut or saddle perfectly vertical while you roll it over sandpaper on a flat surface. Adjustment screws set the amount you want to remove, and in moments the piece is squared up and truly flat. Perfectly square nuts and saddles in seconds!
For solid contact and good tone, the bottom of a nut or saddle must be squared up. This "vise on wheels" is the fastest, surest way to do this.
Solves the tone trouble caused by poor fit.
Hand-sanding a nut or saddle, it's hard not to tilt it one direction or the other. The result is a poor fit in the slot—always a tone problem, but especially with undersaddle pickups.
Aluminum body with steel ball bearing rollersWorks with any nut/saddle material up to 82mm x 10mm.
How to use:
·Use sandpaper on a flat surface.
·Tighten the nut or saddle in the spring-loaded jaw.
·There are two sets of holes for the height adjusters: close for nuts, wide for saddles.
·Each mark on the height-adjusters equals approximately one tenth of a millimeter.
When the wheels start turning, you’ve reached your preset height, and milled the nut or saddle flat.
The LC-6200-10 is the perfect option to replace and upgrade the nut on your classical guitar. It is pre-slotted to make for a quick and easy install.
The PQ-1728-00 is the perfect option to upgrade the nut on your six string guitar. It is pre-slotted for a quick and simple install.
The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
The PQ-9000-00 is a blank TUSQ acoustic saddle with a slight radius on top. It is a great option for someone who wants to custom shape a new saddle. A lot of the work is already done for you.
The PQL-1000-00 is a great option to upgrade or replace the nut on your Fender style electric guitar or bass. It is pre-shapped but requires slots to be complete.
The PT-9125-00 is a great option to replace or upgrade the saddle on your acoustic guitar. It is a 1/8" thick slab of Black TUSQ XL that you can fabricate just about anything from.