Search
Categories
- Tuners
- Bridges & Tailpieces
- Tremolos
- Pickups - Preamps - Piezo
- Pickup Parts
- Electronics
- Hardware
- Pickguards & Control Plates
- Bodies & Necks
- Lutherie
- Tools
- Colors
- Strings
- Accessories
- Amp & Case Parts
- Bluegrass Instruments and Ukulele Parts
- Fender®
- Duesenberg®
- Sandberg®
- Dan Armstrong® Resonators
- Jensen® Speakers
- Aged Parts
- Left Handed Parts
- Parts for 7 & 8 String Guitar
Viewed products
-
GHOST® PIEZO ACOUSTIC...
The BN-9286-RU is one piece (bulk...
GHOST® PIEZO ACOUSTIC STEEL STRING SADDLE (1 PCE)
25,50 €tax incl.
(recommended public price)
BN-9286-RU
The BN-9286-RU is one piece (bulk pack) ghost loaded pickup for acoustic steel stringed instruments.
GHOST® GUITAR ACOUSTIPHONIC BASIC PREAMP KIT
The PE-0240-00 is the basic Ghost Acousti-Phonic preamp kit. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar.
GHOST® PASSIVE VOLUME KIT
The PE-0400-00 lets you connect ghost saddle pickups directly to the supplied stereo 1/4"" output jack. One side for your magnetic pickups and the other side for the ghost pickups. No batteries required, although we recommend an outside piezo preamp for ultimate acoustic tone.
GHOST® HEXPANDER PLUS PREAMP W/TRAKTION
The PE-0440-00 is our basic Hexpander Preamp Kit. It has all the components (excluding pickups) that you need to add MIDI capabilities to your guitar or bass. *You will also need a set of ghost loaded pickups to complete the setup. We offer pickups sets for guitar and bass. We have individual sets of ghost loaded saddles as well as complete ghost loaded...
GHOST® PICKUPS SUMMING BOARD
Summing Board connects all the ghost pickups together for into the Acousti-Phonic preamp. An additional summing board can be used to increase the number of inputs (or strings) that can be used with the Acousti-Phonic preamp. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.
GHOST® ACOUSTIPHONIC ADVANCED PREAMP KIT...
The PK-0240-00 is the advanced Ghost Acousti-Phonic preamp kit for guitar. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar and adds in the Quickswitch (to switch between acoustic and electric sounds, or both at the same time) and Mid/Dark Push/Pull pot with Volume...
GHOST® HEXPANDER ADVANCED PREAMP KIT...
Play the IMPOSSIBLE! Be the Band with the Ghost® Pickup System. Get studio-quality MIDI-compatible output at the flick of a switch! Finally, an affordable, modular pickup system in an easy-to-install package. - Fastest, most accurate tracking available with today's state-of-the-art MIDI converters. - All the benefits of Graph Tech's patented String Saver™...
30 other products in the same category:
GHOST® LOADED RESOMAX® NVW WRAPAROUND...
PN-8593-CO
The PN-8593-CO is a ghost loaded ResoMax NW2 adjustable wraparound bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® LOADED RESOMAX® NVW WRAPAROUND...
PN-8593-BN
The PN-8593-BN is a ghost loaded ResoMax NW2 adjustable wraparound bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® PIEZO WILKINSON® VS-100 SADDLES (6...
PN-8200-00
The PN-8200-00 is set of ghost loaded pickups for a Wilkinson VS tremolo bridge. They will work with any of our ghost preamp kits.
GHOST® STEREO SWITCHED JACK CABLE ASSEMBLY
PE-5003-00
The PE-5003-00 is the cable assembly to solder to the Stereo Switched Output Jack and plug into the Acousti-Phonic.
GHOST® LOADED RESOMAX® NV 6mm TUNE-O-MATIC...
PN-8863-NO
The PN-8843-NO is a ghost loaded 6mm ResoMax NV2 tune-o-matic bridge. This lightweight, high strength bridge will increase harmonic content and leave your guitar dripping with tone. This bridge will work with any ghost preamp kit.
GHOST® QUICK SWITCH ASSEMBLY FOR...
PE-0111-00
The PE-0111-00 is a 3-position switch that lets you instantly switch between mag/both/acoustic when plugged into the Acousti-Phonic.When plugged into the Hexpander MIDI Interface, this same component selects between MIDI/both/guitar, where guitar is whatever is on the Acousti-Phonic's QuickSwitch.
GHOST® MID/DARK SWITCH
PE-0106-00
The PE-0106-00 is a Volume harness for the Acousti-Phonic with a 2-position toggle switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz). Lets you connect a 250K or 500K pot (convert tone pot or provide your own pot) to the Acousti-Phonic. Note: this harness also...
GHOST® STEREO Y CABLE - STEREO TO 2 MONO
PD-0810-00
To use the Acousti-Phonic's Stereo Mode -- to send the mags to your guitar amp and the acoustic piezo saddles to an acoustic amp or direct to the P.A. system -- you need to split the signal using a Y-cable. We are please to offer this stereo-to-two-mono Y-cable, which is the right kind for use with the Acousti-Phonic.
GHOST® INTERFACE WIRING HARNESS
PD-0512-00
The PD-0512-00 connects the Hexpander MIDI Interface board to the 13-pin Jack. 12 inches long. This harness has 16 holes, and on each end one hole is blocked to "key" the connector so it can't be plugged into the Hexpander or 13-pin jack the wrong way.
GHOST® EXPANDER PREAMP BOARD
PD-0440-00
The PD-0440-00 is a replacement Hexpander MIDI Interface board. Replaces the board included in the PE-0440-00, PK-0440-00, PK-0680-00, and PK-0780-00.
GHOST® BASS ACOUSTIPHONIC PREAMP BOARD
PD-0340-00
The PD-0340-00 is a replacement Acousti-Phonic preamp board EQ'd for bass. Replaces the board included in the PE-0340-00, PK-0340-00, and PK-0780-00.
GHOST® MAG TO PIN 7 OUTPUT WIRING HARNESS
PE-0182-GO
The PE-0182-GO is used If you are installing the Hexpander without the Acousti-Phonic and allows you to have signal transmission (magnetic pickups and/or raw piezo signal) run down pin 7 of your 13 pin cable.
GHOST® PIEZO ACOUSTIC NYLON STRING SADDLE...
BN-9277-RU
The BN-9277-RU is one piece (bulk pack) ghost loaded pickup for acoustic nylon stringed instruments.
GHOST® PIEZO BASS SADDLE ABM® BRIDGE (1 PCE)
BN-8360-00
The BN-8360-00 is one piece (bulk pack) ghost loaded pickup for an ABM style bass bridges.
GHOST® MOMENTARY UP/DOWN PROGRAM SELECTOR...
PE-0180-00
The PE-0180-00 is an optional control for the Hexpander MIDI Interface. This switch allows you to scroll up and down through your MIDI converter's sounds. It's the same as what some converters call an S1/S2 switch.
GHOST® HEXPANDER VOLUME POT
PE-0181-00
The PE-0181-00 is an optional control for the Hexpander MIDI Interface, this volume pot allows you to adjust your MIDI converter's volume without taking your hands off your guitar or bass.
GHOST® 13 PIN OUTPUT WITH TRAKTION SWITCH
PE-0540-00
The PE-0540-00 is a 13-pin Jack for ghost Hexpander preamp, with Traktion switch to select tracking curve for Roland or Axon and other converters. It includes mounting plate and all the screws, bolts, and washers.
GHOST® GUITAR ACOUSTIPHONIC BASIC PREAMP KIT
PE-0240-00
The PE-0240-00 is the basic Ghost Acousti-Phonic preamp kit. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar.
GHOST® BASS ACOUSTIPHONIC BASIC PREAMP KIT
PE-0340-00
The PE-0340-00 is the basic Ghost Acousti-Phonic preamp kit. It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric bass.
GHOST® PASSIVE VOLUME KIT
PE-0400-00
The PE-0400-00 lets you connect ghost saddle pickups directly to the supplied stereo 1/4"" output jack. One side for your magnetic pickups and the other side for the ghost pickups. No batteries required, although we recommend an outside piezo preamp for ultimate acoustic tone.
GHOST® HEXPANDER PLUS PREAMP W/TRAKTION
PE-0440-00
The PE-0440-00 is our basic Hexpander Preamp Kit. It has all the components (excluding pickups) that you need to add MIDI capabilities to your guitar or bass. *You will also need a set of ghost loaded pickups to complete the setup. We offer pickups sets for guitar and bass. We have individual sets of ghost loaded saddles as well as complete ghost loaded...
GHOST® VOLUME POT CABLE ASSEMBLY
PE-5002-00
The PE-5002-00 is a cable assembly to solder to a regular 250K or 500K volume pot so that it can plug into the Acousti-Phonic and control the acoustic volume. Also includes wires to connect your mags to the Acoust-Phonic.
GHOST® ACOUSTIC VOL POT WITH PUSH-PULL...
PE-0206-00
The PE-0206-00 is the volume pot for the Acousti-Phonic with an incorporated push/pull switch that selects two EQ settings for the acoustic output -- the classic, dark ghost sound, and one with a boost in the mid range (around 2KHz).
HIPSHOT® A STYLE BASS BRIDGE SADDLE BLACK...
BN-5A00-B
Hipshot A style bass bridge saddle black for piezo mounting (1 piece). To pair with BN-8370-00.
HIPSHOT® A STYLE BASS BRIDGE SADDLE CHROME...
BN-5A00-C
Hipshot A style bass bridge saddle chrome for piezo mounting (1 piece). To pair with BN-8370-00.
GHOST® PIEZO BASS SADDLE HIPSHOT® BRIDGE...
BN-8370-00
The BN-8370-00 is one piece (bulk pack) ghost loaded pickup for a Hipshot A-style bass bridge. Can be paired with BN-5A00-C or BN-5A00-B saddles.
GHOST® ACOUSTIPHONIC PREAMP BOARD
PD-0240-00
The PD-0240-00 is a Acousti-Phonic preamp board EQ'd for Guitar. Replaces the board included in the PE-0240-00, PK-0240-00, and PK-0680-00.
GHOST® DUAL CONNECTOR CABLE
PE-5021-00
The PE-5021-00 is used to connect the Summing Board to the Acousti-Phonic. This component is included with the PE-0240-00, PE-0340-00, PK-0680-00 and PK-0780-00.
GHOST® ACOUSTIC NYLON STRING MIDI KIT...
PK-7077-00
The PK-7077-00 is the Acoustic MIDI system for nylon string guitars. This allows you to add our Hexpander and Acousti-Phonic to any nylon string guitar. It gives you access to the fastest tracking MIDI system along as well as an extremely realistic acoustic tone to your acoustic guitar
GHOST® LOADED FLOYD ROSE® LICENSED TREMOLO...
PN-0080-BO
The PN-0080-B0 is a drop-in, ghost loaded replacement for a Floyd Rose Original and Licensed bridge in black. The custom ghost pickup inserts are encased in our own String Saver™ material. Can be used with any ghost preamp kit or on its own.
