FENDER® 1/4" JACK WITH BATTERY SWITCHING PIN WITH MOUNTING HARDWARE (FISHMAN®)

FENDER® CONCENTRIC 250K/500K AUDIO SOLID...

0019268049

Top-quality potentiometers used on U.S. Fender® instruments with 3/8" potentiometer shafts. Package includes one concentric 250K/500K audio, solid shaft potentiometer. Does not include mounting hardware or capacitor. Will not work with push-on style control knobs (set screw mounting knobs only). Used for the stacked Volume and Tone controls on the...

FENDER® PURE VINTAGE 5-POSITION PICKUP...

0038929049

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments...

FENDER® PURE VINTAGE 3-POSITION PICKUP...

0053694049

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments...

FENDER® STRATOCASTER® MID BOOST UPGRADE KIT

0057577000

Upgrade your Stratocaster® to active electronics with this mid boost kit. Kit includes primary PCB board, TBX Tone Potentiometer, Volume and Tone Potentiometers, output jack, capacitor, 1/4 watt resistor, and control mounting washers and nuts. Will work with virtually any Stratocaster pickups. Kit does not include pickups or pickup selector switch....

FENDER® PURE VINTAGE 250K SPLIT SHAFT...

0990830000

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments...

FENDER® PURE VINTAGE 250K SOLID SHAFT...

0990831000

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments...

FENDER® 250K NO-LOAD SPLIT SHAFT...

0990832000

An integral part of the Delta Tone™ system used on Fender® American Series electric guitars, the "No-Load" potentiometer functions as a normal tone control from 1 to 9. At 10, however, the tone control is taken out of the circuit for increased output and overall tonal response. The 250K is usually associated with most single-coil pickups. 3/8"...

FENDER® 250K NO-LOAD SOLID SHAFT POT (VOL....

0990833000

An integral part of the Delta Tone™ system used on Fender® American Series electric guitars, the "No-Load" potentiometer functions as a normal tone control from 1 to 9. At 10, however, the tone control is taken out of the circuit for increased output and overall tonal response. The 250K control is typically associated with single-coil pickups. 3/8"...

FENDER® 500K SOLID SHAFT POTENTIOMETER...

0990835000

Top-quality potentiometers used on U.S. Fender® instruments. The 500K is usually associated with most humbucking pickups. 3/8" potentiometer shaft. Solid shaft design. Works with set screw mounting knobs. Mounting nut, washer, and .022mf 250V capacitor included. Fits nearly all Fender instruments (U.S. and Mexico) requiring a solid-shaft potentiometer.

FENDER® DUAL 500K/250K SPLIT SHAFT...

0990847000

Top-quality potentiometers used on U.S. Fender® instruments with 3/8" potentiometer shafts. Package includes one concentric 250K/500K audio, solid shaft potentiometer. Does not include mounting hardware or capacitor. Will not work with push-on style control knobs (set screw mounting knobs only). Used for the stacked Volume and Tone controls on the...

FENDER® 3-POSITION VINTAGE-STYLE...

0992041000

Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender® offers high-quality switches with knobs and mounting hardware. Package includes one white Strat® tip and one black Original Tele® tip. Used on American Vintage Stratocaster®/Telecaster® models (US), American Standard, American Special Telecaster models (US),...

FENDER® TBX (TREBLE BASS EXPANDER) TONE...

0992052000

The Treble Bass Expander (TBX) is a detented, stacked 250K / 1Meg control that enhances your tonal palette. It functions as a standard tone control from 1 to 5; after 5 it decreases resistance, letting more bass, treble, presence and output flow to your amp. No battery necessary. Each TBX Tone Control comes with a .022mf capacitor, 1/4 watt resistor,...

FENDER® 4-POSITION CUSTOM SHOP TELECASTER®...

0992250000

Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender® offers high-quality switches with knobs and mounting hardware. Used on many Custom Shop instruments, this switch allows you to change your Telecaster® pickup wiring from Series to Parallel for increased output and a fatter tone with the flick of a switch....

FENDER® 250K PUSH/PULL SPLIT SHAFT...

0992257000

Add a coil tap or phase switch to your guitar without having to drill extra holes. This standard 250K potentiometer has the added feature of a push-pull double-pole/double-throw switch. Simply pull up on the knob to engage the switch. Includes mounting hardware. Dimensions 0.75x4.50x5.50 IN Poids 0.20 LB

FENDER® 5-POSITION...

0992251000

Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender® offers high-quality switches with knobs and mounting hardware. Package includes one white Strat® switch tip and one black barrel-style Tele® switch tip. Used on American made Fat & Double Fat Stratocaster® and the Nashville Telecaster®, this switch is...

FENDER® 5-POSITION MODERN-STYLE...

0991367000

Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender® offers high-quality switches with knobs and mounting hardware. Package includes one white and one black switch tip. Used on most American Standard, American Series, American Special models (US), and Standard and Deluxe Series models (Mexico). Dimensions...

FENDER® 500K SPLIT SHAFT POTENTIOMETER...

0990834000

Top-quality potentiometers used on U.S. Fender® instruments. The 500K is usually associated with most guitars equipped with a humbucking pickup. 3/8" potentiometer shaft. Split shaft design. Works with push-on style knobs (no set screw). Mounting nut, washer, and .022mf 250V capacitor included. Fits nearly all Fender instruments (U.S. and Mexico)...

FENDER® S-1™ 250K SWITCH/POT SPLIT SHAFT

0061256049

S-1™ switching offers a multitude of extra tonal options for your instrument and can be wired into a variety of configurations (SPST, DPDT for a coil-tap, or 4PDT for a dual humbucking coil tap). This 250K split-shaft S-1 switch works great with a five-way Stratocaster® "Super" switch (Fender part number 0992251000). Accepts push-on knobs only (sold...

FENDER® S-1™ 250K SWITCH/POT SOLID SHAFT

0061260049

S-1™ switching offers a multitude of extra tonal options for your instrument and can be wired into a variety of configurations (SPST, DPDT for a coil-tap, or 4PDT for a dual humbucking coil tap). This 250K solid-shaft S-1 switch works great with a five-way Stratocaster® "Super" switch (Fender part number 0992251000). Accepts set-screw knobs only (knob,...

EVH® CUSTOM POTENTIOMETER LOW FRICTION 500K

0220835000

EVH® CUSTOM POTENTIOMETER LOW FRICTION 500K Axis Length: 9.6mm / Base diameter: 23.7mm / Total Length: 30.4mm / Axis Type: Smooth / Axis Type 2: 6.35mm

EVH® CUSTOM POTENTIOMETER LOW FRICTION 250K

0220831000

EVH® CUSTOM POTENTIOMETER LOW FRICTION 250K Axis Length: 9.6mm / Base diameter: 23.7mm / Total Length: 30.4mm / Axis Type: Smooth / Axis Type 2: 6.35mm

FENDER® TONE SAVER - 250K

7706416049

If you experience tonal change when turning down the volume control on your guitar, the Fender Tone Saver is a great solution. Unlike traditional treble bleed circuits that involve connecting tiny parts together with delicate soldering, the Tone Saver contains a special R/C network inside one convenient enclosure that will keep your guitar's tone...

FENDER® CTS 50K AUDIO SPLIT SHAFT

0021682049

50K split shaft potentiometer. 3/8" potentiometer shaft. Accepts push-on style knobs. Includes mounting hardware. Used in the Powerhouse Strat, Eric Clapton Stratocaster for mid boost, and other guitars with active electronics.

FENDER® 1/4" JACK 2 CONDUCTORS WITH...

0021956049

For a sound connection, keep your contemporary or vintage instruments in great shape with genuine Fender® input jacks for a variety of electric guitar and bass models.Package includes one 2-conductor output jack with mounting hardware (3/8").Used on most Fender instruments produced from '52-Present.

FENDER® ROAD WORN® STRATOCASTER® JACK...

0997206000

Crafted to give your Strat® the aged look and feel of a well-loved original, Road Worn parts are genuine Fender replacement parts. Designed to the same specifications as their original-era counterparts, and wearing the patina of age, Road Worn parts let you easily customize your guitar with vintage-inspired aesthetics. Dimensions 2.25x5.25x6.20 IN Poids...

FENDER® 250K PICKUP PAN POTENTIOMETER

0049441000

FENDER® 1/4" JACK STEREO WITH MOUNTING...

0073618049