CERAMIC MAGNET BAR FOR MINI TELE NECK HUMBUCKER 54 x 5 x 6mm

SCHATTEN® VINTAGE COIL WIRE 42 GAUGE (ENV...

This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each half pound spool contains approximately 25,000 feet...

SCHATTEN® VINTAGE COIL WIRE 43 GAUGE (ENV...

This is the type of coil wire used on most vintage pickups. The copper wire has a single build of plain enamel as the insulator. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.

SCHATTEN® MODEL B COIL WINDING MACHINE...

Model B winding machine kits are designed to wind coil wire from 38 ga. to 44 gauge or finer. It is a small profile machine fully capable of winding thousands of pickups over its service life. Everything that you need to assemble a fully working Model B winding machine is provided in this pre-drilled easy to assemble kit. Assembly consists mostly of some...

SCHATTEN® MODERN COIL WIRE 42 GAUGE (ENV...

This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal diameter of 0.0025". Each...

SCHATTEN® MODERN COIL WIRE 43 GAUGE (ENV...

This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 43 gauge - Slightly finer than 42 gauge, this wire has a nominal diameter of 0.0022". Each half pound spool contains approximately 33,000 feet of wire.

SCHATTEN® MODERN COIL WIRE 44 GAUGE (ENV...

This is the type of coil wire used for most of the pickups being built at this time. The copper wire has a single layer of polyurethane as the insulator with an overcoat of nylon. 44 gauge - Finer still than 43 gauge, this wire has a nominal diameter of 0.0020". Each half pound spool contains approximately 41,600 feet of wire.

SCHATTEN® HEAVY FORMVAR COIL WIRE 42 GAUGE...

Used widely in vintage single coil pickups from the '50s and '60, and commonly used today in many custom-shop and reissue guitar pickups. The copper wire insulation is made from a Heavy Formvar enamel. 42 gauge - This is the most common gauge of wire used in building and rewinding most modern electric guitar and bass pickups. This wire has a nominal...

FLATWORK VULCANIZED FIBER TELE® NECK...

SEMI-ROUND BOBBIN AND RAIL FOR TELE® NECK...

SEMI-ROUND BOBBIN AND RAIL FOR TELE® NECK...

SEMI-ROUND BOBBIN AND RAIL FOR TELE® NECK...