göldo "Vintage" Neck / TL-Shape / Unfinished / 7,25"göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Sanded ready to paint and finish. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage Single-Action trussrod (access...
göldo "Vintage" Neck / ST-Shape / Finished / 7,25"göldo Vintage-Spec Neck with traditional 7.25" fretboard radius, 21 frets and medium D shaping. Finished with a thin layer of high-gloss clear lacquer. Fretted with Vintage "Spaghetti" frets (2.1mm x 1.1mm). The maple variant (one-piece) features the iconic "Skunk-Stripe" on the back. Vintage...
BLANK BODY CENTRAL AMERICAN MAHOGANY SANDED (48 x 35 x 4.5cm)
Fingerboard maple, 648mm scale, 22 fret slots 500mm x 65mm x 7mm (dimensions may vary slightly) Made in France
Fingerboard rosewood, 648mm scale, 22 fret slots 500mm x 65mm x 7mm (dimensions may vary slightly) Made in France
Knurled press-fit bushings for vintage tuners. Press-Fit like regular vintage bushings but with the appearance of a hex nut. Diameter at the bottom 8.8mm, at the top 10mm Inner diameter 6.4mm Height 8mm Set of 6.
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
Allow fitting of traditional vintage tuners into modern 10mm pegholes. Usually, vintage type tuners are being installed into 8.5mm pegholes. These adapters are for everyone who wants to fit vintage tuners into modern 10mm pegholes. Inner diameter: 6.4mm Set of 6 pcs
Plain press-in bushings for vintage tuners. Diameter at the bottom 7.2mm (for 7mm holes) and 10.5mm at the collar. Inner diameter 6.4mm. Height 8mm. Set of 6.