Rechercher

Catégories

Déjà vus

GOLDO LT1 TREMOLO NICKEL FOR LP

Göldo

GOLDO® LT1 VIBRATO NICKEL

105,00 €TTC
(prix public conseillé)

En stock

TLT1N

GOLDO® LT1 TREMOLO NICKEL

·Fourni avec Inserts US et Métriques
·Entre-Axes des Inserts : 81.5mm


Licensed by Duesenberg®
Can simply be swapped for a stop tailpiece.
No drilling, no milling necessary.
The tremolo is attached to the two threaded tailpiece bushings with the supplied screws.
The round arm can be adjusted in angle and length to easily find the preferred personal setting.
Incl. metric and US screws, matching hex keys and an 8mm open-end wrench for the tremolo arm nut.
The distance between the tailpiece studs should be 81.5 mm, measured from center to center.

    30 autres produits dans la même catégorie

    You must be logged
    Sur commande uniquement

    TDBSG

    *DUESENBERG DIAMOND DELUXE TREMOLO GOLD SHORT (FIT MPTM5)

    286,80 € (prix public conseillé)

    You must be logged
    En stock

    TDRLN

    DUESENBERG RADIATOR TREMOLO LONG NICKEL

    202,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDBLG

    *DUESENBERG LONG TREMOLO GOLD

    286,80 € (prix public conseillé)

    You must be logged
    En stock

    TGD5N

    Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    190,80 € (prix public conseillé)

    You must be logged
    En stock

    TGD5G

    Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    252,00 € (prix public conseillé)

    You must be logged
    En stock

    TGD5A

    Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    190,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TGD7N

    Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    190,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TGD7A

    Inspired by the Duesenberg TDRLN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    190,80 € (prix public conseillé)

    You must be logged
    En stock

    TDRLA

    DUESENBERG RADIATOR TREMOLO LONG ALU

    202,80 € (prix public conseillé)

    You must be logged
    En stock

    TDBLA

    DUESENBERG LONG TREMOLO ALU

    202,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDBSA

    *DUESENBERG DIAMOND DELUXE TREMOLO ALU SHORT (FIT MPTM5)

    202,80 € (prix public conseillé)

    You must be logged
    En stock

    TLT1G

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...

    168,00 € (prix public conseillé)

    You must be logged
    En stock

    TLT1C

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...

    126,00 € (prix public conseillé)

    You must be logged
    En stock

    TLT2N

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...

    126,00 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    TLT2G

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...

    168,00 € (prix public conseillé)

    You must be logged
    En stock

    TLT2C

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With a classic flat arm in Göldo design! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise...

    126,00 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    TDG1JM

    The göldo tremolo for offset guitars is not a copy of the Fender® system, but can replace it without milling, drilling and modifications. It offers all the advantages of the new göldo DG1 tremolo series: butter-smooth movement in "up & down" operation and an in all dimensions settable and elegantly shaped tremolo arm with safe, adjustable zero point....

    115,20 € (prix public conseillé)

    You must be logged
    En stock

    TDG1ST

    DG tremolo system in an ultra-small design and all the advantages of the göldo DG series: butter-smooth operation in "up & down" modes and an elegantly shaped round tremolo arm with safe, settable zero point, adjustable in all dimensions. A true alternative! Including the screws for mounting the base plate. With round tremolo arm. Required routing...

    115,20 € (prix public conseillé)

    You must be logged
    En stock

    TDG1HS

    DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...

    118,80 € (prix public conseillé)

    You must be logged
    En stock

    TDG1HL

    DG-Tremolo-System for mounting on hollowbody guitars with all the advantages of the göldo DG-series: butter smooth action in "up & down" mode and an in all dimensions adjustable and stylish shaped round tremolo arm with secure adjustable zero point. A small hole of approx. 25mm must be cut in the top of the guitar to insert the spring mechanism. Total...

    118,80 € (prix public conseillé)

    You must be logged
    En stock

    TLT1S

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...

    154,80 € (prix public conseillé)

    You must be logged
    En stock

    TLT1B

    Licensed by Duesenberg - Mounted in place of a stop tailpiece. No drilling, no routing, simply screw into the two existing threaded bushings with the enclosed bolts. With round lever for optimum handling! Incl. metric and US screws. Important: The distance between the tailpiece bolts must be exactly 81.5 mm (measured from centre to centre). Otherwise the...

    148,80 € (prix public conseillé)

    You must be logged
    En stock

    TGD5B

    Inspired by the Duesenberg TDRSN, identical in function and material quality! An aluminium frame ensures the best vibration transmission, high-quality axle bearings care for the well-known soft tremolo feel without clamps and optimum tuning stability. The 360° rotatable round lever is adjustable in length, response, position and movement. It couldn't be...

    202,80 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    TGDDH

    GOLDO DOWNHOLDER NICKEL RETROFIT FOR BIGSBY TYPE TREMOLO (METRIC & US STUDS)

    53,40 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDBLLN

    *DUESENBERG LONG TREMOLO NICKEL LEFT HAND

    202,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDRLLG

    *DUESENBERG RADIATOR TREMOLO LONG GOLD LEFT HAND

    286,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDRLLN

    *DUESENBERG RADIATOR TREMOLO LONG NICKEL LEFT HAND

    202,80 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    TM85LN

    DUESENBERG "LESTREM II " TREMOLO NICKEL LEFT HAND

    142,80 € (prix public conseillé)

    You must be logged
    En réapprovisionnement

    TM85LG

    DUESENBERG "LESTREM II " TREMOLO GOLD LEFT HAND

    190,80 € (prix public conseillé)

    You must be logged
    Sur commande uniquement

    TDRLLA

    *DUESENBERG RADIATOR TREMOLO LONG ALU LEFT HAND

    202,80 € (prix public conseillé)
    cover.jpg
    Qui sommes-nous ?

    Fred Guitar, premier distributeur spécialisé dans la pièce détachée pour guitares et basses, consommables et outils pour la construction et la réparation.

    AllParts
    Alpha
    Apollo
    Artec
    Babicz
    Bartolini
    BIG BENDS
    Bigsby
    Bill Lawrence
    Boblen
    Bourns
    CHARVEL®
    Crel Pickups
    CTS
    D&A
    D'Andrea
    Dan Armstrong
    Delano
    Der Jung
    DiMarzio
    Divers
    DLV Finitions
    Dosakol
    Duesenberg
    Dunlop
    Dupont
    EMG
    Evertune
    EVH®
    Faber
    Fender
    Floyd Rose
    Frater Music
    Galli Strings
    Gavitt
    Geronimo Mateos
    GHS Strings
    Gluboost
    Göldo
    Gotoh
    Graph Tech
    GRETSCH®
    Grover
    Gruv Gear
    Guitars & Woods
    Headway
    Hepcat
    Hipshot
    Hosco
    JACKSON®
    Jensen
    Jescar
    Jupiter
    K&K Sound
    Kent Armstrong
    Kerly Music
    Klemmsia
    Kluson
    Kovax
    Leo Quan Badass
    Liutopia
    Lock-It
    MARCEAU GUITARS
    MENZERNA
    Mi-Si
    Mirka
    Mitchell
    Musedo
    Nectite
    NEWTONE STRINGS
    Philippe Bosset
    PROCELL
    Pure Tone
    Q-parts
    Rakso
    Ratio
    Razor
    Riviera
    RUBIO MONOCOAT
    Rubner
    San Lorenzo
    Sandberg
    Savarez
    Schaller
    Schatten
    Schertler
    Sintoms
    Skull Strings
    SP Custom
    Sperzel
    Steph
    Stetsbar
    Summit
    Switchcraft
    Tan Bridges
    Thalia
    Thomas Flinn
    THREEBOND
    Titebond
    TKL
    TONE VISE
    TonePros
    TREMOL-NO
    TV Jones
    Two Cherries
    Valresa
    Van Zandt Pickups
    VARTA
    Vaudoo audio
    Vega-Trem
    Vibramate
    WD MUSIC
    Wilkinson