Rechercher
Catalogue
Chargement...
Sous-catégories
ARTEC® UNDER SADDLE PIEZO PICKUP FOR ACOUSTIC GUITAR 55mm STRING SPACING
ARTEC® PREAMP 3 BAND EQUALIZER + PRESENCE FOR LOWER-BOUT MOUNT (HOLE: 83.5 x 43 mm)Nominal input level : -20 dBV Frequency Response : 20 Hz - 20 kHz Input Impedance : 1 MOhm Output Impedance : 1 kOhm Power Supply : 9 V Alkaline Battery Bass control range : ± 12 dB 80 Hz, 570 mVp-p Middle control range : ± 12 dB 800 Hz, 490 mVp-p Treble control range : ±...
ARTEC® UNDER SADDLE PIEZO PICKUP FOR CLASSICAL GUITAR 58mm STRING SPACING
ARTEC® UNDER SADDLE FLEXIBLE BRAIDED PIEZO PICKUP FLAT SHAPE FOR ACOUSTIC GUITAR 85mm LONG-Flat piezo cable -Piezo cable length : 85mm -Piezo cable large : 2.70mm -Piezo cable thickness : 1.00mm -Gold plated jack plug 2.5mm -Cable Diameter : 1.70mm
ARTEC® UNDER SADDLE PIEZO PICKUP FOR SPLIT SADDLE 4+2 STRINGS ACOUSTIC GUITAR
ARTEC® UNDER SADDLE PIEZO PICKUP FOR UKULELE 44mm STRING SPACING
STIMER – ST48 PICKUP - Magnetic single coil pickup - Length : 140 mm - Thickness : 8 mm - Integrated volume control - Nickel-plated brass cover - Nickel-plated steel back with non-slip protection - For "petite bouche" gipsy guitars - 3m cable included
STIMER – ST48 PICKUP LEFT HAND - Magnetic single coil pickup - Length : 140 mm - Thickness : 8 mm - Integrated volume control - Nickel-plated brass cover - Nickel-plated steel back with non-slip protection - For "petite bouche" gipsy guitars - 3m cable included
STIMER – ST48 MACCAFERRI PICKUP - Magnetic single coil pickup - Length : 140 mm - Thickness : 8 mm - Integrated volume control - Nickel-plated brass cover - Nickel-plated steel back with non-slip protection - For "grande bouche" gipsy guitars - 3m cable included
T-2 thumbwheel controls are small, circuit board mounted units that can be used as a volume and tone control or as two volume controls. T-2's are also designed to easily be split into two single thumbwheel units should you want to use single thumbwheels for any purpose. T-2's use 500k thumbwheels and come complete with 24 inches of 5 conductor shielded...
The kit consists of two parts. The first is an articulated tool for placing and installing the HFN-S2 sensor inside and onto the bracing in a petite bouche Selmer. The second is a tool for pulling the endpin jack or endpin jack preamp into place from the sound hole to the end block.
The Trinity Pro System is a dual source pickup/microphone system with an external dual-channel pro preamp for guitars and similar string instruments. It features our new & updated Trinity Pro Preamp, which adds a phase switch to the microphone channel for improved feedback resistance and a smoother overall tone. It consists of:Our award-winning...