SCHATTEN DESIGN®

Une petite équipe (Rod, Les, Kristen et Tracy) dans le sud de l'Ontario au Canada, s'est lancée dans la fabrication de micros pour les instruments acoustiques folk, nous proposons un florilège de leurs produits.

Sur www.schattendesign.com, découvrez plus d'infos, d'images, de produits que nous pouvons aussi commander pour vous. Tous les modèles ...

Une petite équipe (Rod, Les, Kristen et Tracy) dans le sud de l'Ontario au Canada, s'est lancée dans la fabrication de micros pour les instruments acoustiques folk, nous proposons un florilège de leurs produits.

Sur www.schattendesign.com, découvrez plus d'infos, d'images, de produits que nous pouvons aussi commander pour vous. Tous les modèles que nous vous présentons sont passifs et de qualité, c'est aussi ce qui fait leur intérêt.

En voir plus...
SCHATTEN DESIGN®

Rechercher

Catégories

Catalogue

Fabricant

SCHATTEN DESIGN® Il y a 17 produits.

par page
Résultats 13 - 17 sur 17.

PUTTY

Two large pieces of medium and soft putty for mounting pickups outside or inside most instruments. Used with our HFN series, EP and LP series, Dualie pickups.

11,50 € TTC (prix public conseillé)
New Deal
Sur commande uniquement

RB-2

The RB-2 (passive) provides our RB bridge sensor, black jack assembly and adds a second sensor that fits to the fingerboard for that Rock-A-Billy string slap. Included with the RB-2 is a pair of integrated thumbwheel volume controls for balancing the pickups. The controls mount to the underside of the fingerboard. Main Sensor: The RB sensor has a nominal...

210,00 € TTC (prix public conseillé)

RG-03

The RG-03 is the original center mounted resonator guitar pickup for spider bridge instruments. It comes pre-wired to an endpin jack and is ready for installation. The RG-03 is the way to go for faithful sound reproduction, ease of installation, great anti-feedback characteristics, and so much more. The sensor for the RG-03 mounts easily to the center of...

145,00 € TTC (prix public conseillé)

T-2-500K

T-2 thumbwheel controls are small, circuit board mounted units that can be used as a volume and tone control or as two volume controls. T-2's are also designed to easily be split into two single thumbwheel units should you want to use single thumbwheels for any purpose. T-2's use 500k thumbwheels and come complete with 24 inches of 5 conductor shielded...

49,00 € TTC (prix public conseillé)

TOOL KIT

The kit consists of two parts. The first is an articulated tool for placing and installing the HFN-S2 sensor inside and onto the bracing in a petite bouche Selmer. The second is a tool for pulling the endpin jack or endpin jack preamp into place from the sound hole to the end block.

34,00 € TTC (prix public conseillé)
Résultats 13 - 17 sur 17.