Search
Catalog
Loading...
Subcategories
The BJ-02 series sensor is designed to work on any banjo. Five string, tenor, six string, open backs; all sound excellent with this pickup. Installation of the pickup system takes about ten minutes and everything that you need to complete the installation is included with the system.The pickup comes supplied with 3M VHB tape for mounting the sensor (as...
The MVC jack assembly gives you a secure and reliable mounting for the output jack. On these thicker bodied instruments using a clamp-on jack assembly is just not practical thing. The MVC jack assembly, which nestles in right next to the tail piece, is only a half an inch high and mounts from the tailpiece (not the body). The BM-1 sensor is small and...
MI-SI SPECIAL PREAMP FOR PASSIVE PIEZO PICKUPS (+CHARGER) The Mi-Si Crystal is designed to retrofit existing passive pickup systems to make them active. It features a battery-free preamp designed specifically to work with undersaddle guitar pickups using passive piezo elements.
ARTEC® EDGE-Z PREAMP 3 BAND EQUALIZER + PRESENCE + TUNER FOR UPPER-BOUT MOUNT (HOLE: 81.5 x 50 mm) INTEGRATED BATTERY BOX
The EP-01 is a small, light weight piezo sensor that is usually installed internally on an instrument's soundboard. The pickup comes with 18" of shielded cable. The piezo element is covered with an acoustic foam pad to help protect the element. Since the element is not 'potted' or heavily protected from damage, this sensor is normally installed either on...
The EP-01 is a small, light weight piezo sensor that is usually installed internally on an instrument's soundboard. The pickup comes with 18" of shielded cable.The EP-01J adds an endpin jack to the basic EP-01. It is not pre-wired to the jack. The piezo element is covered with an acoustic foam pad to help protect the element. Since the element is not...
ARTEC® ETN-MC PREAMP WITH INTERNAL MICROPHONE AND PIEZO 3 BAND EQUALIZER AND CHROMATIC TUNER -Hole: 81.5 x 38.5 mm -Integrated Battery Box -Upper-Bout Mount -Piezo Pickup Not Included
ARTEC® ETN-4 PREAMP 3 BAND EQUALIZER + PRESENCE + TUNER FOR UPPER-BOUT MOUNT(HOLE: 81.5 x 38.5 mm) INTEGRATED BATTERY BOX
The HFN is designed to give you a full, rich sound and will reproduce exactly what your guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN's are designed to be used with a preamp - for best results, the HFN passive may be paired up with one of our outboard...
The HFN-C is designed to give you a full, rich sound and will reproduce exactly what your classical guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN-C's are designed to be used with a preamp - for best results, the HFN-C passive may be paired up with one...
The HFN-S2 is designed to give you a full, rich sound and will reproduce exactly what your gypsy jazz guitar sounds like. Along with being simple to install, these pickups exhibit excellent feedback rejection and good string to string balance. All HFN-S2's are designed to be used with a preamp - for best results, the HFN-S2 passive may be paired up with...